text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

154 product(en) gevonden

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Prijs: £500.00

Beknopt overzicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Prijs: £19.00

Beknopt overzicht: The angle block slider enables users to position elements horizontally on the base plate.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 500x500x12mm (M8)

ID: FX-BP500__500

Prijs: CHF1,453.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 600x600x12mm (M8)

ID: FX-BP600__600

Prijs: 7.949,00 zł

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prijs: 78,00 zł

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Longueur: 10mm
Diamètre: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Corner Bracket

ID: FV-CNRBRKT

Prijs: 216,00 zł

Beknopt overzicht: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Universal Clamp (M8)

ID: FX-CLAMP

Prijs: 540,00 zł

Beknopt overzicht: The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Single

ID: FV-VEE

Prijs: 134,00 zł

Beknopt overzicht: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

Op voorraad – Verzendtijd 1-2 dagen

Tension Post (M4)

ID: FV-POST

Prijs: CHF15.00

Beknopt overzicht: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Basic Kit

ID: FX-BASIC__KIT

Prijs: CHF453.00

Beknopt overzicht: The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.

Filetage: M8
Application: MMT, Bras de mesure portables

Op voorraad – Verzendtijd 1-2 dagen

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Prijs: CHF337.00

Beknopt overzicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Articulated Fixture Arm (M8)

ID: FX-ARM

Prijs: CHF83.00

Beknopt overzicht: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Filetage: M8

Op voorraad – Verzendtijd 1-2 dagen

Slider Block (M4)

ID: FV-SLIDER

Prijs: CHF15.00

Beknopt overzicht: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prijs: CHF14.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Longueur: 10mm
Diamètre: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Clamp (M4)

ID: FV-SPRING

Prijs: CHF44.00

Beknopt overzicht: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

Resting Cone (M4)

ID: FV-CONE

Prijs: CHF13.00

Beknopt overzicht: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Filetage: M4

Op voorraad – Verzendtijd 1-2 dagen

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prijs: 818,00 £

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diamètre extérieur du mandrin (D1): 70mm
Plage de serrage extérieur (A): 1 - 71mm
Plage de serrage intérieur (I): 18 - 66mm
Matériau: Acier inoxydable
Fixation (G): M3

Op voorraad – Verzendtijd 1-2 dagen

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prijs: CHF900.00

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.