Máquina Herramienta

Hollow taper shank HSK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK50 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT30 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK50 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Thermal insulated hollow taper shank HSK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Taper Shank JIS BT40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Adapter from CC11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with CC11 connection.

Taper Shank SK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Plastic mounting tool for easy unscrewing of service and battery covers of machine tool touch probe TP-O-400.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"

Thermal insulated hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK40 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 50 mm / 1.97"

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 100 mm / 3.94"

Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 10 m / 32.8'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'