text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

154 product(en) gevonden

ID: GB-0122-1000

Prijs: £5,720.00

Beknopt overzicht: SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.

Compatibilidad: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: £466.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibilidad: HP-S-X1 Stylus Clampings
Diámetro: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: £402.00

Beknopt overzicht: Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.

Compatibilidad: HP-S-X3 Stylus Clampings
Diámetro: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs:

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Op voorraad – Verzendtijd 1-2 dagen

Vee Locator

ID: FV-FEMALE

Prijs: £22.00

Beknopt overzicht: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Op voorraad – Verzendtijd 1-2 dagen

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Prijs: £203.00

Beknopt overzicht: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilidad placas: FV-200-200C, FV-200/200F, FV-200/200P

Op voorraad – Verzendtijd 1-2 dagen

Cone Adjustable (M4)

ID: FV-CONEADJ

Prijs: £12.00

Beknopt overzicht: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Rosca: M4

Op voorraad – Verzendtijd 1-2 dagen

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Prijs: £28.00

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 10mm
Diámetro: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern

ID: FV-BP200__200P

Prijs: £227.00

Beknopt overzicht: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: £27.00

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: £36.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: zł40.50

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20mm
Diámetro: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prijs: zł211.50

Beknopt overzicht: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Op voorraad – Verzendtijd 1-2 dagen

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prijs: zł139.50

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: zł3,127.50

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prijs: zł103.50

Beknopt overzicht: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 100mm
Diámetro: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prijs: zł139.50

Beknopt overzicht: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Op voorraad – Verzendtijd 1-2 dagen

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prijs: zł189.00

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 20mm
Diámetro: 16mm

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Prijs: zł4,356.00

Beknopt overzicht: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M8
Aplicación: MMC, Brazos Medición Portátil

Op voorraad – Verzendtijd 1-2 dagen

Pillar 30x30x150mm

ID: FX-PR30__150

Prijs: zł184.50

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Tamaño: 30 x 30 x 150mm

Op voorraad – Verzendtijd 1-2 dagen

Toegevoegd aan uw winkelwagen.

Previous
1(current)
2
3
4
5
Next

Productbeschikbaarheid per winkellocatie

Uren

CMM

Filters