text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Temperature Sensor (L = 100 mm)
ID: H00027388
Prijs:  €435.00
Beknopt overzicht:  Temperature sensor (L = 100 mm) for use on temperature probes for machine tools.
  • Previous Part Number:  44.00-T100
  • Compatibilidad:  IRP25.50-TP , RWP20.50-G-TP, RWP20.50-M-TP
  • Longitud:  100mm
  • Diámetro:  12mm
Op voorraad – Verzendtijd 1-2 dagen
Break Shaft (TC-L1)
ID: H00027379
Prijs:  €22.00
Beknopt overzicht:  Break shaft for use in styli and stylus adapters with break shaft connection. For use on machine tools. Previous part number: 91.00-S
Op voorraad – Verzendtijd 1-2 dagen
M3-Stylus (R-6-SS-4-L6)
ID: H00031271
Prijs:  €92.00
Beknopt overzicht: 

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3

  • Previous Part Number:  91.00-T9/6-ST-M3
Op voorraad – Verzendtijd 1-2 dagen
M3-Stylus (R-6-SS-3-L22)
ID: H00031268
Prijs:  €103.00
Beknopt overzicht: 

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem, length 22 mm. For use on machine tools. Previous part number: 91.00-T25/6-ST-M3

  • Previous Part Number:  91.00-T25/6-ST-M3
  • Rosca:  M3
  • Material de la punta:  Rubí
  • Diámetro de punta (D):  6mm
  • Longitud (L):  22mm
Op voorraad – Verzendtijd 1-2 dagen
Temperature Sensor (L = 150 mm)
ID: H00027389
Prijs:  €467.00
Beknopt overzicht:  Temperature sensor (L = 150 mm) for use on temperature probes for machine tools. Previous part number: 44.00-T150
  • Previous Part Number:  44.00-T150
  • Compatibilidad:  IRP25.50-TP , RWP20.50-G-TP, RWP20.50-M-TP
  • Longitud:  150mm
  • Diámetro:  12mm
Op voorraad – Verzendtijd 1-2 dagen
M8-QUAL sphere V2 - Standard (D = 25.4 mm)
ID: 03939542
Prijs:  €1,750.00
Beknopt overzicht:  Calibration sphere for use with laser scanners for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 5 mm)
ID: 5209
Prijs:  €100.00
Beknopt overzicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diámetro:  5mm
  • Longitud:  120mm
  • Aplicación:  Laser Tool Setter Calibration
  • Material:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 10 mm)
ID: 4286
Prijs:  €108.00
Beknopt overzicht:  Calibration pin (D = 10 mm). For use on machine tools.
  • Diámetro:  10mm
  • Longitud:  120mm
  • Aplicación:  Laser Tool Setter Calibration
  • Material:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Battery (3.6 V / 1/2AA)
ID: 4316
Prijs:  €6.00
Beknopt overzicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Tamaño:  1/2 AA
  • Voltaje:  3,6V
  • Capacity:  1.200mAh
  • Compatibilidad:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 14 mm
ID: 4274
Prijs:  €7.00
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Material:  Tempered Steel
  • Internal Thread:  M12
  • Medida nominal de ranura en T:  14mm
Op voorraad – Verzendtijd 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  €49.00
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diámetro:  25mm
  • Longitud:  75mm
  • Material:  Acero inoxidable
Op voorraad – Verzendtijd 1-2 dagen
Battery (3 V / CR2032)
ID: 5309
Prijs:  €4.00
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Tamaño:  9 V Block
  • Voltaje:  9V
  • Capacity:  1.200mAh
  • Compatibilidad:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE200
Prijs:  €356.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 200 mm. Used to extend the length of measuring units on machine tools.
  • Material:  Fibra de carbono
  • Longitud:  200mm
  • Diámetro:  25mm
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE150
Prijs:  €486.00
Beknopt overzicht:  Extension made of carbon fibre, Ø25 mm, length 150 mm. Used to extend the length of measuring units on machine tools.
  • Longitud:  150mm
  • Diámetro:  25mm
  • External Thread:  M16x1
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 22 mm
ID: 4411
Prijs:  €27.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 12 mm
ID: 4418
Prijs:  €6.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 18 mm
ID: 4431
Prijs:  €15.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Storage Box
ID: 4301
Prijs:  €34.00
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 4 mm / D = 10 mm)
ID: 4420
Prijs:  €241.00
Beknopt overzicht:  #N/A
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE300
Prijs:  €520.00
Beknopt overzicht:  Extension (300 mm) made of carbon for measuring units on machine tools.
Op voorraad – Verzendtijd 1-2 dagen