text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Prijs:  19,00 €
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Longitud:  20 mm
  • Diámetro:  20 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Prijs:  2.754,00 €
Beknopt overzicht:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-GOLD/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prijs:  1.318,00 €
Beknopt overzicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prijs:  3.715,00 €
Beknopt overzicht:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1.565,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3
  • Diámetro exterior mandril (D1):  160
  • Area de fijación exterior (A):  1 - 150
  • Area de fijación interior (I):  34 - 174
  • Material:  Acero inoxidable
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  987,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Op voorraad - verzending 1-2 dagen
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prijs:  5.756,00 €
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Referencia:  GB0096-2001
  • Compatibilidad CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Levertijd > 25 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  1.004,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Prijs:  1.145,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP400/400
  • Rosca:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prijs:  2.530,00 €
Beknopt overzicht:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FV-FULLKIT
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  84,00 €
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Referencia:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  33,00 €
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Referencia:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prijs:  60,00 €
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prijs:  43,00 €
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/150
  • Tamaño:  30 x 30 x 150 mm
Op voorraad - verzending 1-2 dagen
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prijs:  27,00 €
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Referencia:  FX-POST
  • Rosca:  M8
Op voorraad - verzending 1-2 dagen
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  1.020,00 €
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Referencia:  FX-PILLAR/KIT
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  £ 45,00
Beknopt overzicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  £ 36,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/100
  • Tamaño:  30 x 30 x 100 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prijs:  £ 45,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Referencia:  FX-PR30/250
  • Tamaño:  30 x 30 x 250 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prijs:  £ 35,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/50
  • Tamaño:  30 x 30 x 50 mm
Op voorraad - verzending 1-2 dagen