text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

Medios de sujección

Se han encontrado 94 producto(s)

ID: FV-SLIDE

Precio: CHF420.00

Resumen: Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Precio: CHF570.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Referencia: FV-BP200/200C
Rosca: M4

Existencias disponibles - Envío en 1-2 días

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Precio: CHF22.00

Resumen: The angle block slider enables users to position elements horizontally on the base plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Precio: CHF19.00

Resumen: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Longitud: 10mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Corner Bracket

ID: FV-CNRBRKT

Precio: CHF52.00

Resumen: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Existencias disponibles - Envío en 1-2 días

Tension Post (M4)

ID: FV-POST

Precio: CHF19.00

Resumen: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Precio: CHF600.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Slider Block (M4)

ID: FV-SLIDER

Precio: CHF18.00

Resumen: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Precio: CHF18.00

Resumen: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Longitud: 10mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Spring Clamp (M4)

ID: FV-SPRING

Precio: CHF46.00

Resumen: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Resting Cone (M4)

ID: FV-CONE

Precio: CHF15.00

Resumen: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Precio: CHF930.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación (G): M3

Existencias disponibles - Envío en 1-2 días

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Precio: CHF940.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación: M4 / M8

Existencias disponibles - Envío en 1-2 días

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Precio: CHF54.00

Resumen: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 20mm
Diámetro: 16mm

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Precio: CHF1,010.00

Resumen: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M8
Aplicación: MMC, Brazos Medición Portátil

Existencias disponibles - Envío en 1-2 días

Pillar 30x30x150mm

ID: FX-PR30__150

Precio: CHF43.00

Resumen: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Tamaño: 30 x 30 x 150mm

Existencias disponibles - Envío en 1-2 días

Tension Post (M8)

ID: FX-POST

Precio: CHF27.00

Resumen: This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Standoff (D = 20 mm / L = 30 mm)

ID: FX-SO20__30

Precio: CHF18.00

Resumen: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.