text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Katalógus
  3. CMM

CMM

Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  £14.96
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  £902.88
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  £912.56
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  £31.68
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  £45.76
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  £16.72
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  £81.84
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Precio:  £9.68
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Precio:  €26.00
Resumen:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  17,00 €
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  1 030,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  17,00 €
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  20mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  1 750,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  1 140,00 €
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  18,00 €
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  21,00 €
Resumen:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  48,00 €
Resumen:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Tamaño:  130 x 30 mmmm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1 470,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  39,00 €
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 100mm
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  48,00 €
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 250mm
Existencias disponibles - Envío en 1-2 días