text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  £19.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prijs:  £491.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prijs:  £500.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prijs:  £19.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prijs:  £45.00
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prijs:  £527.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prijs:  £14.00
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prijs:  £818.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prijs:  £827.00
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  £818.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  £29.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  25,00 CHF
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad – Verzendtijd 1-2 dagen
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  42,00 CHF
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad – Verzendtijd 1-2 dagen
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  236,00 CHF
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
Op voorraad – Verzendtijd 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  €10.00
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  €82.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Op voorraad – Verzendtijd 1-2 dagen
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  €32.00
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  €750.00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Op voorraad – Verzendtijd 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  €32.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Op voorraad – Verzendtijd 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  €38.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
Op voorraad – Verzendtijd 1-2 dagen