text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
ID: FC-70SS3
Precio:  CHF940.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
ID: FX-PILLAR__KIT
Precio:  CHF1,020.00
Resumen:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
Existencias disponibles - Envío en 1-2 días
ID: FX-SO__SUPP
Precio:  CHF22.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  10mm
  • Diámetro:  15mm
Existencias disponibles - Envío en 1-2 días
ID: FX-HEIGHT
Precio:  CHF62.00
Resumen:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Longitud:  50mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
ID: FX-BP400__600
Precio:  CHF1,810.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: D28-SK__CAT40-A__B
Precio:  CHF224.00
Resumen: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Existencias disponibles - Envío en 1-2 días
ID: FX-PR30__250
Precio:  CHF49.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 250mm
Existencias disponibles - Envío en 1-2 días
ID: FX-PR30__50
Precio:  CHF38.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 50mm
Existencias disponibles - Envío en 1-2 días
ID: FX-BP600__600
Precio:  CHF1,900.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FX-SO16__30
Precio:  CHF18.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  30mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
ID: FV-SO__PIN
Precio:  CHF19.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
ID: FX-SO__PIN
Precio:  CHF22.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  25mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
ID: FX-SLIDER
Precio:  CHF26.00
Resumen:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FX-PR30__200
Precio:  CHF46.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 200mm
Existencias disponibles - Envío en 1-2 días
ID: FX-SILVER__KIT
Precio:  CHF1,690.00
Resumen:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
ID: FX-CLAMP
Precio:  CHF129.00
Resumen:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FV-VEE
Precio:  CHF32.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
ID: FX-BASIC__KIT
Precio:  CHF475.00
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
ID: FX-PLUNGER
Precio:  CHF95.00
Resumen:  The spring plunger exerts low forces to hold sensible parts in position.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FX-LATLGE
Precio:  CHF63.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  20mm
Existencias disponibles - Envío en 1-2 días