text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo

Catálogo

M5-Stylus (DS-3-TC-2-L30)
M5-Stylus (DS-3-TC-2-L30)
ID: M00-694-194-000
Precio:  4.816,00 zł
Descripción rápida:  Straight stylus with M5 thread, diamond sphere Ø3 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on coordinate measuring machines (CMM).
  • Referencia:  M00-694-194-000
  • Rosca:  M5
  • Material de la punta:  Diamante
  • Diámetro de punta (D):  3
  • Longitud (L):  30
Entrega > 25 días
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
D2-Stylus (DS-1-TC-0.8/2-L22) - Tapered
ID: M00-694-190-000
Precio:  4.816,00 zł
Descripción rápida:  Straight stylus with Ø2 mm, diamond sphere Ø1 mm, tapered tungsten carbide stem Ø0.8/2 mm, length 22 mm. For use on coordinate measuring machines (CMM).
  • Referencia:  M00-694-190-000
  • Rosca:  D2
  • Material de la punta:  Diamante
  • Diámetro de punta (D):  1
  • Longitud (L):  22
Entrega > 25 días
Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
ID: ART111277
Precio:  11.954,00 zł
Descripción rápida:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Referencia:  ART111277
  • Codificación:  14 bits
  • Rango de números:  151 - 500
  • Tipo de reflexión:  Retro-reflexivo
  • Diámetro (D1):  15
Tiempo de entrega 10-15 días
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
ID: H00033800-01
Precio:  3.569,00 zł
Descripción rápida:  Angled probe (45°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  H00033800-01
  • Ángulo:  45
  • Offset (Y):  38
  • Longitud:  149
  • Clase de protección:  IP54
Entrega > 25 días
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
ID: H00033800-08
Precio:  3.569,00 zł
Descripción rápida:  Angled probe (60°) with mounted M3-Stylus, tip Ø6 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-08
  • Ángulo:  60
  • Diámetro de punta:  6
  • Offset (Y):  57
  • Longitud:  149
Entrega > 25 días
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-07
Precio:  3.569,00 zł
Descripción rápida:  Angled probe (60°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-07
  • Ángulo:  60
  • Diámetro de punta:  4
  • Offset (Y):  57
  • Longitud:  149
Entrega > 25 días
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  2.064,00 zł
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  2.408,00 zł
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
ID: RE54T153-00039
Precio:  2.052,00 zł
Descripción rápida: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
ID: RE54T153-00032
Precio:  2.246,40 zł
Descripción rápida: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.  
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Precio:  59.374,00 zł
Descripción rápida: 

PC-DMIS Offline permite programar y simular rutinas de medición con rapidez y comodidad en un entorno virtual lleno de elementos. Licencia multiusuario.
  • Referencia:  ROY-CAD++-O-FLOAT
  • Referencia:  ROY-CAD++-O-FLOAT
  • Tipo de licencia:  Floating Licence
  • Requerimientos:  Consulte la pestaña Requisitos de software
  • Precio:  Por licencia
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Precio:  2.451,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE115
  • Material:  Fibra de carbono
  • Longitud:  115
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
Ceramic Calibration Sphere Kit (D=15 mm, H=144-193.1-214,5 mm)
Ceramic Calibration Sphere Kit (D=15 mm, H=144-193.1-214,5 mm)
ID: G39031401
Precio:  3.337,00 zł
Descripción rápida: 

Calibration sphere set for coordinate measuring machines (CMMs). The set includes a certified ceramic calibration sphere (Ø 15 mm) and a robust support that allows precise positioning of the sphere at 0°, 45°, and 90°. With M8 mounting for secure machine fixing.
  • Referencia:  G39031401
  • Material de la esfera:  Cerámica
  • Diámetro de la esfera (D):  15
Tiempo de entrega 10-15 días
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Precio:  2.494,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE430
  • Material:  Fibra de carbono
  • Longitud:  430
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Precio:  2.494,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE450
  • Material:  Fibra de carbono
  • Longitud:  450
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
ID: RE54T153-00057
Precio:  7.257,60 zł
Descripción rápida: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
ID: RE54T153-00033
Precio:  8.445,60 zł
Descripción rápida: 

Target Group: Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals: To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites: Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GEB243 Battery int Li-Ion 14.4 V / 6400 mAh
GEB243 Battery int Li-Ion 14.4 V / 6400 mAh
ID: 971703
Precio:  1.742,00 zł
Descripción rápida: 

Rechargable internal Li-Ion battery Li-Ion 14.4 V / 6400 mAh
  • Referencia:  971703
  • Compatibilidad del sistema:  TM6100A Motorized Industrial Theodolite
Tiempo de entrega 10-15 días
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
ID: RE54T153-00055
Precio:  3.067,20 zł
Descripción rápida: 

Target Group: New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals: To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites: Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
Workshop Measurement (Classroom Training 2 Days)
Workshop Measurement (Classroom Training 2 Days)
ID: RE54T153-00007
Precio:  3.499,20 zł
Descripción rápida: 

Target Group: Anyone who needs basic knowledge in measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals: To provide basic knowledge to build upon in the field of workshop metrology.
Prerequisites: No special prerequisites are required.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com