text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catálogo

Catálogo

Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
Azonosító: ART111277
Ár:  2.527,00 £
Gyors áttekintés:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Referencia:  ART111277
  • Codificación:  14 bits
  • Rango de números:  151 - 500
  • Tipo de reflexión:  Retro-reflexivo
  • Diámetro (D1):  15
A szállítási idő 10-15 nap
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
Azonosító: ROY-CAD**-O
Ár:  10.453,00 £
Gyors áttekintés: 

PC-DMIS Offline permite programar y simular rutinas de medición con rapidez y comodidad en un entorno virtual lleno de elementos. Licencia de usuario individual.
  • Referencia:  ROY-CAD++-O
  • Referencia:  ROY-CAD++-O
  • Tipo de licencia:  Licencia de usuario individual
  • Requerimientos:  Consulte la pestaña Requisitos de software
  • Precio:  Por licencia
Probe with fixed ball (SS-15-C-150)
Probe with fixed ball (SS-15-C-150)
Azonosító: H00000383-13
Ár:  487,00 £
Gyors áttekintés:  150 mm carbon probe with glue-mounted stainless steel ball Ø15 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-13
  • Diámetro de punta:  15
  • Longitud:  150
Szállítási > 25 nap
Probe with M3-Stylus (R-4-C-130)
Probe with M3-Stylus (R-4-C-130)
Azonosító: H00000576-05
Ár:  487,00 £
Gyors áttekintés:  130 mm carbon probe with mounted ruby ball M3-Stylus Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00000576-05
  • Diámetro de punta:  4
  • Longitud:  130
Szállítási > 25 nap
Probe with fixed ball (SS-9.525-C-82)
Probe with fixed ball (SS-9.525-C-82)
Azonosító: H00000383-06
Ár:  487,00 £
Gyors áttekintés:  82 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-06
  • Diámetro de punta:  9.525
  • Longitud:  82
Szállítási > 25 nap
Probe with fixed ball (SS-10-C-150)
Probe with fixed ball (SS-10-C-150)
Azonosító: H00000383-12
Ár:  487,00 £
Gyors áttekintés:  150 mm carbon probe with glue-mounted stainless steel ball Ø10 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-12
  • Diámetro de punta:  10
  • Longitud:  150
Szállítási > 25 nap
Probe with fixed ball (SS-9.5-SS-50)
Probe with fixed ball (SS-9.5-SS-50)
Azonosító: H00000906-01
Ár:  649,00 £
Gyors áttekintés:  50 mm stainless steel probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Referencia:  H00000906-01
  • Diámetro de punta:  9.5
  • Longitud:  50
Szállítási > 25 nap
Tool Box 35.20-TB
Tool Box 35.20-TB
Azonosító: 35.20-TB
Ár:  52,00 £
Gyors áttekintés:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Referencia:  35.20-TB
  • Compatibilidad:  TS35.20
Raktáron - Kiszállítás 1-2 napon belül
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Azonosító: H00033800-01
Ár:  755,00 £
Gyors áttekintés:  Angled probe (45°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  H00033800-01
  • Ángulo:  45
  • Offset (Y):  38
  • Longitud:  149
  • Clase de protección:  IP54
Szállítási > 25 nap
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
Azonosító: H00033800-05
Ár:  755,00 £
Gyors áttekintés:  Angled probe (60°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  H00033800-05
  • Ángulo:  60
  • Offset (Y):  57
  • Longitud:  149
  • Clase de protección:  IP54
Szállítási > 25 nap
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
Azonosító: H00033800-08
Ár:  755,00 £
Gyors áttekintés:  Angled probe (60°) with mounted M3-Stylus, tip Ø6 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-08
  • Ángulo:  60
  • Diámetro de punta:  6
  • Offset (Y):  57
  • Longitud:  149
Szállítási > 25 nap
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
Azonosító: H00033800-07
Ár:  755,00 £
Gyors áttekintés:  Angled probe (60°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-07
  • Ángulo:  60
  • Diámetro de punta:  4
  • Offset (Y):  57
  • Longitud:  149
Szállítási > 25 nap
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
Azonosító: GB0122-0019
Ár:  436,00 £
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
A szállítási idő 10-15 nap
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
Azonosító: GB0122-0008
Ár:  509,00 £
Gyors áttekintés:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
A szállítási idő 10-15 nap
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
Azonosító: RE54T153-00039
Ár:  418,00 £
Gyors áttekintés: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
Azonosító: RE54T153-00032
Ár:  457,60 £
Gyors áttekintés: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.  
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
Azonosító: ROY-CAD**-O-FLOAT
Ár:  12.553,00 £
Gyors áttekintés: 

PC-DMIS Offline permite programar y simular rutinas de medición con rapidez y comodidad en un entorno virtual lleno de elementos. Licencia multiusuario.
  • Referencia:  ROY-CAD++-O-FLOAT
  • Referencia:  ROY-CAD++-O-FLOAT
  • Tipo de licencia:  Floating Licence
  • Requerimientos:  Consulte la pestaña Requisitos de software
  • Precio:  Por licencia
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
Azonosító: 41.00-VE430
Ár:  527,00 £
Gyors áttekintés: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE430
  • Material:  Fibra de carbono
  • Longitud:  430
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
A szállítási idő 10-15 nap
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
Azonosító: RE54T153-00057
Ár:  1.478,40 £
Gyors áttekintés: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
Azonosító: RE54T153-00033
Ár:  1.720,40 £
Gyors áttekintés: 

Target Group: Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals: To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites: Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com