text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo

Catálogo

Enclosure 07.10.07 with Filter Fans and Manual Doors
Enclosure 07.10.07 with Filter Fans and Manual Doors
ID: GB0117-1005
Descripción rápida: 

Enclosure for coordinate measuring machine with measuring range X 700 mm, Y 1000 mm, Z 700 mm. Cost-effective solution with filter fans and manual doors for environmentally protected CMM measurements in the production environment. Dimensions: 1500 mm x 2100 mm x 3000 mm
  • Referencia:  GB0117-1005
  • Compatibilidad CMM:  GLOBAL 07.10.07
Enclosure 09.15.08 with Filter Fans and Manual Doors
Enclosure 09.15.08 with Filter Fans and Manual Doors
ID: GB0117-1009
Descripción rápida: 

Enclosure for coordinate measuring machine with measuring range X 900 mm, Y 1500 mm, Z 800 mm. Cost-effective solution with filter fans and manual doors for environmentally protected CMM measurements in the production environment. Dimensions: 2000 mm x 3000 mm x 3400 mm
  • Referencia:  GB0117-1009
  • Compatibilidad CMM:  GLOBAL 09.15.08
Enclosure 09.15.08 with Air Conditioning and Automatic Doors
Enclosure 09.15.08 with Air Conditioning and Automatic Doors
ID: GB0117-1010
Descripción rápida: 

Enclosure for coordinate measuring machine with measuring range X 900 mm, Y 1500 mm, Z 800 mm. Cost-effective solution with air conditioning and automatic doors for environmentally protected CMM measurements in the production environment. Dimensions: 2000 mm x 3000 mm x 3400 mm
  • Referencia:  GB0117-1010
  • Compatibilidad CMM:  GLOBAL 09.15.08
AID15 for Inner Diameters
AID15 for Inner Diameters
ID: 577357
Precio:  522,00 CHF
Descripción rápida:  AID15 for Inner Diameters
  • Referencia:  577357
  • Tamaño del reflector:  1.5"
  • Rosca:  M8
Tiempo de entrega 10-15 días
Absolute Arm Raiser (500 mm) with Mounting Ring 3.5"
Absolute Arm Raiser (500 mm) with Mounting Ring 3.5"
ID: NCA7-5-52795
Precio:  2.625,00 CHF
Descripción rápida: 

Multi-purpose 500 mm stand, suitable for Absolute Arm tube stations as well as other high-accuracy arm applications. For use with all Absolute Arm models, except Absolute Arm model RA8v3.
  • Referencia:  NCA7-5-52795
  • Tamaño de brazo recomendado:  1,5 - 4,5
  • Compatibilidad:  Absolute Arm RA7, Absolute Arm RA8
Entrega > 25 días
Absolute Arm Raiser (250 mm) with Mounting Ring 3.5"
Absolute Arm Raiser (250 mm) with Mounting Ring 3.5"
ID: NCA7-5-52794
Precio:  2.205,00 CHF
Descripción rápida: 

Multi-purpose 250 mm stand, suitable for Absolute Arm tube stations as well as other high-accuracy arm applications. For use with all Absolute Arm models, except Absolute Arm model RA8v3.
  • Referencia:  NCA7-5-52794
  • Tamaño de brazo recomendado:  1,5 - 4,5
  • Compatibilidad:  Absolute Arm RA7, Absolute Arm RA8
Entrega > 25 días
Probe with M3-Stylus (R-4-C-85)
Probe with M3-Stylus (R-4-C-85)
ID: H00000576-02
Precio:  536,00 CHF
Descripción rápida:  85 mm carbon probe with mounted ruby ball M3-Stylus Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00000576-02
  • Diámetro de punta:  4
  • Longitud:  85
Entrega > 25 días
Probe with M3-Pointer Stylus (C-85)
Probe with M3-Pointer Stylus (C-85)
ID: 54397-03
Precio:  536,00 CHF
Descripción rápida:  85 mm carbon probe with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  54397-03
  • Longitud:  85
Entrega > 25 días
Probe with fixed ball (SS-9.525-C-82)
Probe with fixed ball (SS-9.525-C-82)
ID: H00000383-06
Precio:  536,00 CHF
Descripción rápida:  82 mm carbon probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Referencia:  H00000383-06
  • Diámetro de punta:  9.525
  • Longitud:  82
Entrega > 25 días
Probe with fixed ball (SS-9.5-SS-50)
Probe with fixed ball (SS-9.5-SS-50)
ID: H00000906-01
Precio:  714,00 CHF
Descripción rápida:  50 mm stainless steel probe with glue-mounted stainless steel ball Ø9.5 mm. For use with all Absolute Arm models.
  • Referencia:  H00000906-01
  • Diámetro de punta:  9.5
  • Longitud:  50
Entrega > 25 días
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
Angle Probe 45DEG with M3-Pointer Stylus (TC-10)
ID: H00033800-01
Precio:  830,00 CHF
Descripción rápida:  Angled probe (45°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  H00033800-01
  • Ángulo:  45
  • Offset (Y):  38
  • Longitud:  149
  • Clase de protección:  IP54
Entrega > 25 días
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
Angle Probe 60DEG with M3-Pointer Stylus (TC-L10)
ID: H00033800-05
Precio:  830,00 CHF
Descripción rápida:  Angled probe (60°) with mounted M3-Pointer Stylus. For use with all Absolute Arm models.
  • Referencia:  H00033800-05
  • Ángulo:  60
  • Offset (Y):  57
  • Longitud:  149
  • Clase de protección:  IP54
Entrega > 25 días
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
Angle Probe 60DEG with M3-Stylus (R-6-SS-2.7-L10)
ID: H00033800-08
Precio:  830,00 CHF
Descripción rápida:  Angled probe (60°) with mounted M3-Stylus, tip Ø6 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-08
  • Ángulo:  60
  • Diámetro de punta:  6
  • Offset (Y):  57
  • Longitud:  149
Entrega > 25 días
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 60DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-07
Precio:  830,00 CHF
Descripción rápida:  Angled probe (60°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-07
  • Ángulo:  60
  • Diámetro de punta:  4
  • Offset (Y):  57
  • Longitud:  149
Entrega > 25 días
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
Angle Probe 90DEG with M3-Stylus (R-4-SS-2.5-L10)
ID: H00033800-11
Precio:  830,00 CHF
Descripción rápida:  Angled probe (90°) with mounted M3-Stylus, tip Ø4 mm. For use with all Absolute Arm models.
  • Referencia:  H00033800-11
  • Ángulo:  90
  • Diámetro de punta:  4
  • Offset (Y):  43
  • Longitud:  173
Entrega > 25 días
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
ID: RE54T153-00039
Precio:  546,25 CHF
Descripción rápida: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
ID: RE54T153-00032
Precio:  598,00 CHF
Descripción rápida: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
PC-DMIS CAD++ OFFLINE
PC-DMIS CAD++ OFFLINE
ID: ROY-CAD**-O
Precio:  11.498,00 CHF
Descripción rápida: 

PC-DMIS Offline permite programar y simular rutinas de medición con rapidez y comodidad en un entorno virtual lleno de elementos. Licencia de usuario individual.
  • Referencia:  ROY-CAD++-O
  • Referencia:  ROY-CAD++-O
  • Tipo de licencia:  Licencia de usuario individual
  • Requerimientos:  Consulte la pestaña Requisitos de software
  • Precio:  Por licencia
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
PC-DMIS CAD++ OFFLINE FLOATING LICENCE
ID: ROY-CAD**-O-FLOAT
Precio:  13.808,00 CHF
Descripción rápida: 

PC-DMIS Offline permite programar y simular rutinas de medición con rapidez y comodidad en un entorno virtual lleno de elementos. Licencia multiusuario.
  • Referencia:  ROY-CAD++-O-FLOAT
  • Referencia:  ROY-CAD++-O-FLOAT
  • Tipo de licencia:  Floating Licence
  • Requerimientos:  Consulte la pestaña Requisitos de software
  • Precio:  Por licencia
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
ID: RE54T153-00057
Precio:  1.932,00 CHF
Descripción rápida: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com