text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 168 producto(s)

ID: FV-SO__PIN

Precio: £16.00

Resumen: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Longitud: 10
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Tension Post (M4)

ID: FV-POST

Precio: £16.00

Resumen: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Precio: £527.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Slider Block (M4)

ID: FV-SLIDER

Precio: £15.00

Resumen: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Precio: £15.00

Resumen: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Longitud: 10
Diámetro: 8

Existencias disponibles - Envío en 1-2 días

Resting Cone (M4)

ID: FV-CONE

Precio: £14.00

Resumen: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Thumb Screw M8

ID: FX-THUMB

Precio: £9.00

Resumen: With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Precio: £53.00

Resumen: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Tamaño: 120 x 45 x 12 mm

Existencias disponibles - Envío en 1-2 días

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Precio: £818.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.