text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  2.064,00 zł
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  2.408,00 zł
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  5.246,00 zł
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Precio:  5.667,00 zł
Descripción rápida:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  4.902,00 zł
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Precio:  1.797,00 zł
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Precio:  2.038,00 zł
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Referencia:  FC-JS-160SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Precio:  1.565,00 zł
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Precio:  1.797,00 zł
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Precio:  2.038,00 zł
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Referencia:  FC-JS-160SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Precio:  3.139,00 zł
Descripción rápida: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Referencia:  FC-JS-125AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Precio:  3.569,00 zł
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / Ø125 mm).
  • Referencia:  FC-PS-125AL6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  4.042,00 zł
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Precio:  4.386,00 zł
Descripción rápida: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Referencia:  FC-JS-240AL3-I
  • Material:  Aluminium with hard coated surface
Tiempo de entrega 10-15 días
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Precio:  1.565,00 zł
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 160 Inside/Outside Clamping Set (AL)
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Precio:  4.472,00 zł
Descripción rápida: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.
  • Referencia:  FC-JS-160AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Reversible Top Jaw Set for Inside/Outside Clamping
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Precio:  4.816,00 zł
Descripción rápida: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.
  • Referencia:  FC-JS-240SS3-IE
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Precio:  1.183,00 zł
Descripción rápida:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
  • Referencia:  FX-KINKITPLUS
  • Compatibilidad placas:  KB-UNIVL
En Stock - Envío 1-2 Días
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Precio:  598,00 zł
Descripción rápida:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Referencia:  FX-TOG
  • Rosca:  M8
En Stock - Envío 1-2 Días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  24.751,00 zł
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Referencia:  GB0096-2001
  • Compatibilidad CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Entrega > 25 días