text.skipToContent text.skipToNavigation

Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password

CMM

154 prodotto/i trovato/i

ID: FV-CONE

Prezzo: 13,00 CHF

Breve panoramica: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Rosca: M4

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Prezzo: 890,00 CHF

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación (G): M3

In giacenza - Spedizione in 1-2 giorni

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Prezzo: 900,00 CHF

Breve panoramica: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación: M4 / M8

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prezzo: 884,00 CHF

Breve panoramica: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prezzo: 31,00 CHF

Breve panoramica: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Vee Block Twin

ID: FV-VEETWIN

Prezzo: 42,00 CHF

Breve panoramica: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prezzo: 9,00 CHF

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20mm
Diámetro: 8mm

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 20 mm)

ID: FX-SO16__20

Prezzo: 16,00 CHF

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20mm
Diámetro: 16mm

In giacenza - Spedizione in 1-2 giorni

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prezzo: 47,00 CHF

Breve panoramica: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

In giacenza - Spedizione in 1-2 giorni

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prezzo: 31,00 CHF

Breve panoramica: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

In giacenza - Spedizione in 1-2 giorni

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prezzo: 695,00 CHF

Rosca: M8

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Prezzo: 20,00 £

Breve panoramica: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 100mm
Diámetro: 16mm

In giacenza - Spedizione in 1-2 giorni

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prezzo: 27,00 £

Breve panoramica: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

In giacenza - Spedizione in 1-2 giorni

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prezzo: 36,00 £

Breve panoramica: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 20mm
Diámetro: 16mm

In giacenza - Spedizione in 1-2 giorni

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Prezzo: 834,00 £

Breve panoramica: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M8
Aplicación: MMC, Brazos Medición Portátil

In giacenza - Spedizione in 1-2 giorni

Pillar 30x30x150mm

ID: FX-PR30__150

Prezzo: 35,00 £

Breve panoramica: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Tamaño: 30 x 30 x 150mm

In giacenza - Spedizione in 1-2 giorni

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prezzo: 8,00 £

Breve panoramica: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.