text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FV-CONEADJ
Ár:  €21.00
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-BP200__200P
Ár:  €540.00
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
Raktáron - Kiszállítás 1-2 napon belül
SKU: FV-BP200__200C
Price:  €550.00
Quick overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-AB190/200F
  • Rosca:  M4
  • Previous Part Number:  FV-AB180/200F
Stock goods
SKU: FV-ANGSLIDER
Price:  €21.00
Quick overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Stock goods
SKU: FV-CNRBRKT
Price:  €50.00
Quick overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Stock goods
SKU: FV-BP200__200F
Price:  €580.00
Quick overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Stock goods
SKU: FV-CONE
Price:  €15.00
Quick overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Stock goods
SKU: FC-70SS3-NF
Price:  €900.00
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Stock goods
SKU: FC-70SS3
Price:  €910.00
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Stock goods
SKU: FV-GUIDE480
Price:  €254.00
Quick overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
Stock goods
SKU: FV-SO8__20
Price:  €10.00
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20
  • Diámetro:  8
Stock goods
SKU: FX-PR30HINGE
Price:  €82.00
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Stock goods
SKU: FX-CTMED
Price:  €32.00
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods
SKU: FX-BP300__300
Price:  €750.00
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Stock goods
SKU: FX-M8SPRGNUT
Price:  €32.00
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Stock goods
SKU: FV-LATSML
Price:  €38.00
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10
  • Diámetro:  8
Stock goods
SKU: FX-LATMED
Price:  €52.00
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20
  • Diámetro:  16
Stock goods
SKU: FX-BRONZE__KIT
Price:  1 151,00 €
Quick overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Stock goods
SKU: FX-PR30__150
Price:  €42.00
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 150
Stock goods
SKU: FV-SO8__25
Price:  €10.00
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25
  • Diámetro:  8
Stock goods