text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  zł7,327.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  zł6,896.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  zł21,550.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  zł6,465.00
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  zł437,465.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  zł442,206.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  zł434,448.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  zł15,085.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  zł20,688.00
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  zł23,705.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  zł7,758.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  zł23,274.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  zł15,085.00
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  zł341,352.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  zł11,206.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  zł15,085.00
Resumen:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Existencias disponibles - Envío en 1-2 días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  zł26,722.00
Resumen:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Tamaño:  120 x 45 x 12 mmmm
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  zł537,888.00
Resumen:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  zł20,688.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Precio:  zł475,824.00
Resumen:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días