text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC

MMC

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Precio:  £5,720.00
Resumen:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  £551.76
Resumen:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  £472.56
Resumen:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40mm
Existencias disponibles - Envío en 1-2 días
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)
ID: G39031401
Precio:  £778.80
Resumen: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  £21.12
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  £50.16
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  £18.48
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  £581.68
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  £16.72
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  £16.72
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  £14.96
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  £902.88
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  £902.88
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  £45.76
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  £9.68
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  £752.40
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Precio:  £9.68
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  £16.72
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  £1,144.00
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  £9.68
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  15mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días