text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  zł85.50
Szybki podgląd:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Cena:  zł4,005.00
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
W magazynie — wysyłka 1–2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Cena:  zł4,050.00
Szybki podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  zł3,978.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  zł139.50
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  zł112.50
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł189.00
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  zł1,062.00
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł40.50
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  8mm
W magazynie — wysyłka 1–2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  zł63.00
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  zł139.50
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  zł3,127.50
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
W magazynie — wysyłka 1–2 dni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  171,59 €

35,00 €
Szybki podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  177,12 €

36,00 €
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Cena:  232,47 €

48,00 €
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  16mm
W magazynie — wysyłka 1–2 dni
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  5 357,88 €

1 104,00 €
Szybki podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Cena:  49,82 €

10,00 €
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25mm
  • Diámetro:  8mm
W magazynie — wysyłka 1–2 dni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Cena:  138,38 €

29,00 €
Szybki podgląd:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Rosca:  M8
W magazynie — wysyłka 1–2 dni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Cena:  77,49 €

16,00 €
Szybki podgląd:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6mm
  • Diámetro:  8mm
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Cena:  5 595,89 €

1 153,00 €
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
W magazynie — wysyłka 1–2 dni