text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo

Catalogo

Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  €407.00
Breve panoramica:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  €550.00
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  €21.00
Breve panoramica:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  €18.00
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Prezzo:  €50.00
Breve panoramica:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In giacenza - Spedizione in 1-2 giorni
Vee Block Single
Vee Block Single
ID: FV-VEE
Prezzo:  €31.00
Breve panoramica:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In giacenza - Spedizione in 1-2 giorni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Prezzo:  €18.00
Breve panoramica:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Prezzo:  €580.00
Breve panoramica:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  €138.00
Breve panoramica:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  15,00 CHF
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  14,00 CHF
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  41,00 £
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  14,00 £
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  818,00 £
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  827,00 £
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Prezzo:  204,00 £
Breve panoramica: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
In giacenza - Spedizione in 1-2 giorni
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Prezzo:  265,00 £
Breve panoramica: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.
In giacenza - Spedizione in 1-2 giorni
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D28-HSK63F-B
Prezzo:  335,00 £
Breve panoramica: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
In giacenza - Spedizione in 1-2 giorni
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-B
Prezzo:  491,00 £
Breve panoramica: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
In giacenza - Spedizione in 1-2 giorni
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-M
Prezzo:  709,00 £
Breve panoramica: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
In giacenza - Spedizione in 1-2 giorni