text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT

MMT

Resting Cone (M4)
Resting Cone (M4)
N° : FV-CONE
Prix:  CHF13.00
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  CHF900.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Jogbox (NJB) Kit with cable, 6 m
Jogbox (NJB) Kit with cable, 6 m
N° : G59682700
Prix: 
Vue d'ensemble sommaire: 

Next Jogbox (NJB) Kit including cradle and cable (6 m).
En stock - Livraison sous 1 à 2 jours
Next Jogbox (NJB) Kit with cable, 15 m
Next Jogbox (NJB) Kit with cable, 15 m
N° : G59682800
Prix: 
Vue d'ensemble sommaire: 

Next Jogbox (NJB) Kit including cradle and cable (15 m).
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  CHF884.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  CHF31.00
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Vee Block Twin
Vee Block Twin
N° : FV-VEETWIN
Prix:  CHF42.00
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
Spring Clamp (M8)
N° : FX-SPRING
Prix:  CHF48.00
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  CHF16.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  CHF47.00
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
N° : FX-BP300__300
Prix:  CHF695.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  CHF23.00
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  16mm
En stock - Livraison sous 1 à 2 jours
Spring Nut (M8)
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  CHF31.00
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
N° : FX-LATMED
Prix:  36,00 £
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  16mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
N° : FX-BRONZE__KIT
Prix:  834,00 £
Vue d'ensemble sommaire:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x150mm
Pillar 30x30x150mm
N° : FX-PR30__150
Prix:  35,00 £
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 150mm
En stock - Livraison sous 1 à 2 jours
Tension Post (M8)
Tension Post (M8)
N° : FX-POST
Prix:  22,00 £
Vue d'ensemble sommaire:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
N° : FX-BP400__400
Prix:  872,00 £
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Kinematic Support Kit Plus
Kinematic Support Kit Plus
N° : FX-KINKITPLUS
Prix:  227,00 £
Vue d'ensemble sommaire:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
Tension Post (M4)
N° : FV-POST
Prix:  13,00 £
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours