text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
ID: FV-SO8__25
Precio:  £9.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
ID: FV-SOSUP
Precio:  £15.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
ID: FX-BP400__400
Precio:  £936.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FV-BP200__200P
Precio:  £491.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
ID: FX-BP400__600
Precio:  £1,591.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FV-MALE
Precio:  £21.00
Resumen:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
ID: FV-STARTERKIT
Precio:  £1,036.00
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
ID: FV-SO8__15
Precio:  £9.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  15mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
ID: FX-CAPM8__16
Precio:  £16.00
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FV-FULLKIT
Precio:  £2,091.00
Resumen:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
ID: D28-HSK63F-B
Precio:  £335.00
Resumen: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Existencias disponibles - Envío en 1-2 días
ID: FX-CTSML
Precio:  £29.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
ID: FX-SPRING
Precio:  £45.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
ID: FX-THUMB
Precio:  £9.00
Resumen:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: FC-70SS3-NF
Precio:  £818.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
ID: FC-70SS3
Precio:  £827.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
ID: FX-PR30__150
Precio:  £38.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 150mm
Existencias disponibles - Envío en 1-2 días
ID: FX-POST
Precio:  £24.00
Resumen:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
ID: D28-SK30-W
Precio:  £245.00
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Existencias disponibles - Envío en 1-2 días
ID: D20-HSK50E-AJ-B
Precio:  £845.00
Resumen: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with air jet, D20 connection and bidirectional activation in the machine tool.

Existencias disponibles - Envío en 1-2 días