text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  €1,140.00
Resumen:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  €38.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  €46.00
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  €17.00
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  6mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  €45.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Precio:  €540.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  €18.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  €407.00
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  €900.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  €17.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Precio:  €52.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  €49.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  €18.00
Resumen:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Precio:  €61.00
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  20mm
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Precio:  €1,750.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Precio:  €980.00
Resumen:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Existencias disponibles - Envío en 1-2 días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  €125.00
Resumen:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  €1,470.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  €48.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 250mm
Existencias disponibles - Envío en 1-2 días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  €21.00
Resumen:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días