text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo

Catálogo

Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  CHF18.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  CHF15.00
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  CHF930.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  CHF940.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Precio:  CHF224.00
Resumen: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Referencia:  D28-SK__CAT40-A/B
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Precio:  CHF291.00
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-B
Precio:  CHF540.00
Resumen: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK80 Form A
Hollow Taper Shank HSK80 Form A
ID: D28-HSK80A-M
Precio:  CHF780.00
Resumen: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK50
Taper Shank DIN ISO 7388 SK50
ID: D28-SK50-A__B
Precio:  CHF246.00
Resumen: 

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-W
Precio:  CHF224.00
Resumen: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-W
Precio:  CHF269.00
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK30 AZ-01
Taper Shank DIN ISO 7388 SK30 AZ-01
ID: D28-SK30-A
Precio:  CHF380.00
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud AZ-01.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  CHF930.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  CHF33.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  CHF47.00
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  CHF10.00
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  CHF18.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20
  • Diámetro:  16
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  CHF84.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  CHF33.00
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  CHF780.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días