Máquina Herramienta

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X12. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 4 m / 13.1'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 5 m / 16.4'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 1 m / 3.3'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 3 m / 9.8'

Adapter cable with 90°-plug M12/F08 and M12/M08 plug. Length: 0.3 m / 1'

Adapter cable  with M12/F08 and M23/M12 plugs. Length: 3 m / 9.8'

Robust 8‑pin to 8‑pin adapter for connecting the Heidenhain cable 517376 to Hexagon infrared receivers. Suitable for probing systems with bidirectional activation.

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 5 m / 16.4'

Horizontal mounting holder for installing the radio-wave receiver RWR95.40 inside the machining area.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool. Shank length: 70 mm

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.