text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

Catálogo

Se han encontrado 1.317 producto(s)

ID: FV-STARTERKIT

Precio: CHF1,180.00

Resumen: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M4
Aplicación: MMC Multisensores

In Stock

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Precio: CHF10.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 15
Diámetro: 8

In Stock

Swift-Fix Vision - Full Kit

ID: FV-FULLKIT

Precio: CHF2,370.00

Resumen: With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M4
Aplicación: MMC Multisensores

In Stock

Flexible Vice

ID: FV-SLIDE

Precio: CHF420.00

Resumen: Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.

Rosca: M4

In Stock

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Precio: CHF570.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Referencia: FV-AB190/200F
Rosca: M4
Previous Part Number: FV-AB180/200F

In Stock

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Precio: CHF22.00

Resumen: The angle block slider enables users to position elements horizontally on the base plate.

Rosca: M4

In Stock

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Precio: CHF19.00

Resumen: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Longitud: 10
Diámetro: 8

In Stock

Corner Bracket

ID: FV-CNRBRKT

Precio: CHF52.00

Resumen: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

In Stock

Tension Post (M4)

ID: FV-POST

Precio: CHF19.00

Resumen: This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.

Rosca: M4

In Stock

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Precio: CHF600.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

In Stock

Slider Block (M4)

ID: FV-SLIDER

Precio: CHF18.00

Resumen: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Rosca: M4

In Stock

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Precio: CHF18.00

Resumen: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.

Longitud: 10
Diámetro: 8

In Stock

Spring Clamp (M4)

ID: FV-SPRING

Precio: CHF46.00

Resumen: Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Rosca: M4

In Stock

Resting Cone (M4)

ID: FV-CONE

Precio: CHF15.00

Resumen: The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.

Rosca: M4

In Stock

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Precio: CHF930.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70
Area de fijación exterior (A): 1 - 71
Area de fijación interior (I): 18 - 66
Material: Acero inoxidable
Fijación (G): M3

In Stock

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Precio: CHF940.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70
Area de fijación exterior (A): 1 - 71
Area de fijación interior (I): 18 - 66
Material: Acero inoxidable
Fijación: M4 / M8

In Stock

Taper Shank DIN ISO 7388 SK50

ID: D28-SK50-A__B

Precio: CHF246.00

Resumen:

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

In Stock