text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Precio:  zł2,801,500.00
Resumen:  SWIFT-SET is an aid to achieve accurate and reproducible stylus builds for stylus rotation and angles.
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  zł2,430.00
Resumen:  Swift-Set Adaptor for HP-S-X1 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60mm
Existencias disponibles - Envío en 1-2 días
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
SWIFT-SET Adaptor for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  zł2,097.00
Resumen:  Swift-Set Adaptor for HP-S-X3 Stylus Clampings to build a wide range of styli configurations quickly and efficiently.
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40mm
Existencias disponibles - Envío en 1-2 días
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Precio:  zł112.50
Resumen:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Existencias disponibles - Envío en 1-2 días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Precio:  zł409.50
Resumen:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  zł85.50
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  zł58.50
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10mm
  • Diámetro:  8mm
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  zł220.50
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  zł67.50
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  zł1,516.50
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  zł4,050.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  884,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  CHF31.00
Resumen:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  CHF42.00
Resumen:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  CHF48.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  CHF16.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  CHF47.00
Resumen:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Existencias disponibles - Envío en 1-2 días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  CHF31.00
Resumen:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  CHF695.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  CHF23.00
Resumen:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  16mm
Existencias disponibles - Envío en 1-2 días