Máquina Herramienta

Adapter from CC11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with CC11 connection.

Taper Shank SK40 for use with Hexagon touch probes with CC11 connection and bidirectional activation in the machine tool.

Plastic mounting tool for easy unscrewing of service and battery covers of machine tool touch probe TP-O-400.

Interchangeable open-end insert, 9 × 12 mm (wrench size 13 mm) for use with torque wrench (H00045703) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP.

Torque wrench (2.5–25 Nm) for installation and replacement of the ultrasonic measuring unit UTP47.10 on the m&h Radio-wave Probe RWP20.50‑G‑UTP. For use with 9 × 12 mm open-end insert (H00045702).

Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.

Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection. Adapter Ø: 50 mm / 1.97"

Polygonal hollow taper shank in accordance with ISO 26623-1 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Taper shank JIS BT40 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Cylindrical tool holder for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.