text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. Máquina Herramienta

Máquina Herramienta

m&h Infrared Receiver IRR91.50 (Cable exit axial)
m&h Infrared Receiver IRR91.50 (Cable exit axial)
ID: 91.50-IRR-A-PLUG-8~
Precio:  4.128,00 zł
Descripción rápida:  Bidirectional infrared receiver with axial cable exit for dual-probe communication.
  • Referencia:  91.50-IRR-A-PLUG-8#
Tiempo de entrega 10-15 días
m&h Tool Setter TS35.20
m&h Tool Setter TS35.20
ID: 35.20-TS-PT~
Precio:  4.988,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter made of stainless steel with measuring insert Ø 13 mm. Designed for quick tool length and tool radius measurements and reliable tool breakage control. Equipped with base plate for fast and easy vertically mounting and alignment on the machine table. Cable length: 10 m / 32.8' (incl. protection tube 3 m / 9.8')
  • Referencia:  35.20-TS-PT#
Tiempo de entrega 10-15 días
m&h Tool Setter TS35.20
m&h Tool Setter TS35.20
ID: 35.20-TS-PT-D37~
Precio:  5.246,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter made of stainless steel with measuring insert Ø 37 mm. Designed for quick tool length and tool radius measurements and reliable tool breakage control. Equipped with base plate for fast and easy vertically mounting and alignment on the machine table. Cable length: 10 m / 32.8' (incl. protection tube 3 m / 9.8')
  • Referencia:  35.20-TS-PT-D37#
Tiempo de entrega 10-15 días
m&h Tool Setter TS35.30
m&h Tool Setter TS35.30
ID: 35.30-TS-20~
Precio:  3.870,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter m&h TS35.30 made of stainless steel. Equipped with base plate for fast and easy alignment on the machine table. Designed for quick tool length measurement and reliable tool breakage control. Measuring insert Ø24 mm, cable length: 20 m / 65.6′
  • Referencia:  35.30-TS-20#
Entrega > 25 días
m&h Tool Setter TS35.30
m&h Tool Setter TS35.30
ID: 35.30-TS-PT-AJ~
Precio:  4.515,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter made of stainless steel. Equipped with base plate with air jet for clean and reliable measuring conditions and fast and easy alignment on the machine table. Designed for quick tool length measurement and reliable tool breakage control. Measuring insert Ø 24 mm, cable length: 10 m / 32.8' (incl. protection tube: 3 m / 9.8').
  • Referencia:  35.30-TS-PT-AJ#
Entrega > 25 días
m&h Tool Setter TS35.30
m&h Tool Setter TS35.30
ID: 35.30-TS-PT-D62~
Precio:  7.654,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter made of stainless steel. Equipped with base plate for fast and easy alignment on the machine table. Designed for quick tool length measurement and reliable tool breakage control. Measuring insert Ø 62 mm, cable length: 10 m / 32.8' (incl. protection tube 3 m / 9.8').
  • Referencia:  35.30-TS-PT-D62#
Entrega > 25 días
m&h Tool Setter TS35.30
m&h Tool Setter TS35.30
ID: 35.30-TS-PT~
Precio:  3.870,00 zł
Descripción rápida: 

Sturdy, tactile cable tool setter m&h TS35.30 made of stainless steel. Equipped with base plate for fast and easy alignment on the machine table. Designed for quick tool length measurement and reliable tool breakage control. Measuring insert Ø 24 mm, cable length: 10 m / 32.8' (incl. protection tube 3 m / 9.8').
  • Referencia:  35.30-TS-PT#
Entrega > 25 días
m&h Infrared Receiver IRR91.50
m&h Infrared Receiver IRR91.50
ID: 91.50-IRR-A~
Precio:  4.773,00 zł
Descripción rápida: 

Stainless steel infrared receiver with axial cable outlet, designed for reliable communication with Hexagon m&h infrared touch probes and infrared tool setters for machine tools.
  • Referencia:  91.50-IRR-A#
Tiempo de entrega 10-15 días
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Precio:  2.103,00 zł
Descripción rápida:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Referencia:  CALIBRATION SET 14
  • Montaje:  Montaje con ranura en T
  • Diámetro de la esfera:  30
En Stock - Envío 1-2 Días
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Precio:  2.103,00 zł
Descripción rápida:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Referencia:  CALIBRATION SET 12
  • Montaje:  Montaje con ranura en T
  • Diámetro de la esfera:  30
Tiempo de entrega 10-15 días
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Precio:  2.494,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE450
  • Material:  Fibra de carbono
  • Longitud:  450
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-W
Precio:  1.105,00 zł
Descripción rápida: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Referencia:  D28-CAT50-W
  • Interface:  D28
Tiempo de entrega 10-15 días
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Precio:  2.451,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE115
  • Material:  Fibra de carbono
  • Longitud:  115
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
Measuring Unit Extension (L = 140 mm / 5.51")
Measuring Unit Extension (L = 140 mm / 5.51")
ID: 41.00-VE140
Precio:  2.038,00 zł
Descripción rápida: 

Extension made of carbon fibre, Ø25 mm, length 140 mm. Used to extend the length of measuring units on machine tools.
  • Referencia:  41.00-VE140
  • Material:  Fibra de carbono
  • Longitud:  140
  • Diámetro:  25 mm
  • Rosca exterior:  M16x1
Tiempo de entrega 10-15 días
Qualification Sphere with Shaft (D = 25 mm)
Qualification Sphere with Shaft (D = 25 mm)
ID: 03939542
Precio:  7.525,00 zł
Descripción rápida: 

Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
  • Referencia:  03939542
  • Aplicación:  Calibración de la sonda del escáner láser
  • Material:  Cerámica, blanco mate
  • Diámetro de la esfera:  25
  • Longitud:  150
En Stock - Envío 1-2 Días
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-W
Precio:  1.634,00 zł
Descripción rápida: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Referencia:  D28-HSK100A-W
  • Interface:  D28
  • Forma:  A
En Stock - Envío 1-2 Días
Taper Shank SK40 / CAT40
Taper Shank SK40 / CAT40
ID: D28-SK__CAT40-A__B
Precio:  963,00 zł
Descripción rápida: 

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Referencia:  D28-SK/CAT40-A/B
  • Interface:  D28
En Stock - Envío 1-2 Días
Hollow Taper Shank HSK32 Form A
Hollow Taper Shank HSK32 Form A
ID: D28-HSK32A-B
Precio:  3.182,00 zł
Descripción rápida: 

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
  • Referencia:  D28-HSK32A-B
  • Interface:  D28
  • Forma:  A
En Stock - Envío 1-2 Días
Taper Shank SK30 AZ-01
Taper Shank SK30 AZ-01
ID: D28-SK30-A
Precio:  1.634,00 zł
Descripción rápida: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.
  • Referencia:  D28-SK30-A
  • Interface:  D28
En Stock - Envío 1-2 Días
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-A__B
Precio:  1.105,00 zł
Descripción rápida: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Referencia:  D28-CAT50-A/B
  • Interface:  D28
En Stock - Envío 1-2 Días