text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo

Catalogo

Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prezzo:  £125.00
Breve panoramica:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  £15.00
Breve panoramica:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  £15.00
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Prezzo:  £41.00
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  £14.00
Breve panoramica:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  CHF930.00
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  CHF940.00
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  CHF33.00
Breve panoramica:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  CHF50.00
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  CHF10.00
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  CHF18.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  CHF84.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  CHF22.00
Breve panoramica:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  20mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prezzo:  CHF22.00
Breve panoramica:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prezzo:  CHF49.00
Breve panoramica:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Tamaño:  130 x 30 mmmm
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  40,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 100mm
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prezzo:  49,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 250mm
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  38,00 CHF
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 50mm
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prezzo:  18,00 CHF
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  30mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prezzo:  22,00 CHF
Breve panoramica:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  25mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni