text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-CONEADJ
Prijs:  €21.00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200P
Prijs:  €540.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200C
Prijs:  €550.00
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-ANGSLIDER
Prijs:  €21.00
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CNRBRKT
Prijs:  216,00 zł
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  2 506,00 zł
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  65,00 zł
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  3 888,00 zł
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3
Prijs:  3 931,00 zł
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SPRING
Prijs:  212,00 zł
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-THUMB
Prijs:  43,00 zł
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO16__20
Prijs:  73,00 zł
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO16__100
Prijs:  108,00 zł
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  16mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SUB45__120
Prijs:  251,00 zł
Beknopt overzicht:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Tamaño:  120 x 45 x 12 mmmm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-STARTER__KIT
Prijs:  €1,160.00
Beknopt overzicht:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SUP__STOP
Prijs:  €84.00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Rosca:  M8
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO20__20
Prijs:  €17.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  20mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO20__100
Prijs:  €25.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  20mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-TOOLS
Prijs:  €26.00
Beknopt overzicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Op voorraad – Verzendtijd 1-2 dagen
ID: FX-SO__SUPP
Prijs:  €21.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longitud:  10mm
  • Diámetro:  15mm
Op voorraad – Verzendtijd 1-2 dagen