text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
N° : FX-BP600__600
Prix:  €1,840.00
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
N° : FV-SO__PIN
Prix:  €18.00
Vue d'ensemble sommaire:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10mm
  • Diámetro:  8mm
En stock - Livraison sous 1 à 2 jours
Corner Bracket
Corner Bracket
N° : FV-CNRBRKT
Prix:  €50.00
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En stock - Livraison sous 1 à 2 jours
Universal Clamp (M8)
Universal Clamp (M8)
N° : FX-CLAMP
Prix:  €125.00
Vue d'ensemble sommaire:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Vee Block Single
Vee Block Single
N° : FV-VEE
Prix:  €31.00
Vue d'ensemble sommaire:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En stock - Livraison sous 1 à 2 jours
Tension Post (M4)
Tension Post (M4)
N° : FV-POST
Prix:  €18.00
Vue d'ensemble sommaire:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
N° : FX-BASIC__KIT
Prix:  €458.00
Vue d'ensemble sommaire:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
N° : FV-BP200__200F
Prix:  €580.00
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
N° : FX-ARM
Prix:  €138.00
Vue d'ensemble sommaire:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Slider Block (M4)
Slider Block (M4)
N° : FV-SLIDER
Prix:  €17.00
Vue d'ensemble sommaire:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
N° : FV-SO__MAG
Prix:  £15.00
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M4)
Spring Clamp (M4)
N° : FV-SPRING
Prix:  £41.00
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
Resting Cone (M4)
N° : FV-CONE
Prix:  14,96 £
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  902,88 £
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  912,56 £
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Spring Clamp (M8)
Spring Clamp (M8)
N° : FX-SPRING
Prix:  49,28 £
Vue d'ensemble sommaire:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
En stock - Livraison sous 1 à 2 jours
Thumb Screw M8
Thumb Screw M8
N° : FX-THUMB
Prix:  9,68 £
Vue d'ensemble sommaire:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
N° : FX-SO16__20
Prix:  16,72 £
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
En stock - Livraison sous 1 à 2 jours
Hinge Pivot With Handle
Hinge Pivot With Handle
N° : FX-PR30HINGE
Prix:  81,84 £
Vue d'ensemble sommaire:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
En stock - Livraison sous 1 à 2 jours
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
N° : FX-SO16__100
Prix:  25,52 £
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  100mm
  • Diámetro:  16mm
En stock - Livraison sous 1 à 2 jours