text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Precio:  19,00 €
Descripción rápida:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Referencia:  FX-CAPM8/16
  • Rosca:  M8
En Stock - Envío 1-2 Días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  420,00 €
Descripción rápida:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Referencia:  FV-SLIDE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Precio:  19,00 €
Descripción rápida:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Referencia:  FX-CAPM8/20
  • Rosca:  M8
En Stock - Envío 1-2 Días
Swift-Fix - Gold Kit
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Precio:  2.754,00 €
Descripción rápida:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FX-GOLD/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Precio:  262,00 €
Descripción rápida:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Referencia:  FX-KINKIT
En Stock - Envío 1-2 Días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  22,00 €
Descripción rápida:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FX-CONE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  49,00 €
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  129,00 €
Descripción rápida:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Referencia:  FX-CLAMP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Precio:  95,00 €
Descripción rápida:  The spring plunger exerts low forces to hold sensible parts in position.
  • Referencia:  FX-PLUNGER
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Precio:  63,00 €
Descripción rápida:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Referencia:  FX-LATLGE
  • Longitud:  20 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  142,00 €
Descripción rápida:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Referencia:  FX-ARM
  • Rosca:  M8
En Stock - Envío 1-2 Días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  18,00 €
Descripción rápida:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  18,00 €
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FV-SO/MAG
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  46,00 €
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FV-SPRING
  • Rosca:  M4
En Stock - Envío 1-2 Días
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Precio:  275,00 €
Descripción rápida:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
  • Referencia:  FX-KINKITPLUS
  • Compatibilidad placas:  KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Precio:  1.102,00 €
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-400/400
  • Compatibilidad placas:  KPP-500/500, KPT-500/500
En Stock - Envío 1-2 Días
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
ID: KB-UNIVL
Precio:  745,00 €
Descripción rápida:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Referencia:  KB-UNIVL
  • Compatibilidad placas:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Precio:  660,00 €
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-250/250
  • Compatibilidad placas:  KPP-300/300, KPT-300/300
En Stock - Envío 1-2 Días