text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo

Catálogo

Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  zł172.00
Resumen:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 100
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  zł8,170.00
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  zł82.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  zł224.00
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  zł555.00
Resumen:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Rosca:  M8
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  zł138.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  zł3,999.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  zł77.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10
  • Diámetro:  8
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  zł198.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Precio:  zł1,183.00
Resumen:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Existencias disponibles - Envío en 1-2 días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  zł65.00
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
ID: D28-SK__CAT40-A__B
Precio:  zł963.00
Resumen: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
  • Referencia:  D28-SK__CAT40-A/B
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK63 Form E
Hollow Taper Shank HSK63 Form E
ID: D28-HSK63E-B
Precio:  zł1,634.00
Resumen: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK63 Form A
Hollow Taper Shank HSK63 Form A
ID: D28-HSK63A-M
Precio:  zł1,587.00
Resumen: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-M
Precio:  zł1,828.00
Resumen: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Taper Shank DIN ISO 7388 SK30
Taper Shank DIN ISO 7388 SK30
ID: D28-SK30-B
Precio:  zł1,251.00
Resumen: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Cylindrical Shaft for Tool Holder
Cylindrical Shaft for Tool Holder
ID: D28-D32-L100-B
Precio:  zł1,587.00
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK63 Form F
Hollow Taper Shank HSK63 Form F
ID: D28-HSK63F-B
Precio:  zł1,587.00
Resumen: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK50 Form E
Hollow Taper Shank HSK50 Form E
ID: D28-HSK50E-M
Precio:  zł2,068.00
Resumen: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
Existencias disponibles - Envío en 1-2 días
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
ID: D28-HSK100A-W
Precio:  zł1,634.00
Resumen: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Existencias disponibles - Envío en 1-2 días