text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

MMC

Se han encontrado 154 producto(s)

HR-SP-60 Rack Extension (L = 60 mm)

ID: 03969485

Precio: €171.00

Resumen: 60 mm support pillar for a total height of 150 mm.

Longitud: 60mm
Diámetro: 19,5mm

Existencias disponibles - Envío en 1-2 días

Cleaning Putty

ID: 03969650

Precio: €16.00

Resumen: Putty for cleaning dust and dirt from parts, devices and measurement equipment.

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern

ID: FV-BP200__200P

Precio: €263.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern

ID: FV-BP200__200C

Precio: €263.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Angle Block Slider (M4)

ID: FV-ANGSLIDER

Precio: €19.00

Resumen: The angle block slider enables users to position elements horizontally on the base plate.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Corner Bracket

ID: FV-CNRBRKT

Precio: €49.00

Resumen: The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.

Existencias disponibles - Envío en 1-2 días

Acryl Baseplate 200x200x10mm (M4) - Full Pattern

ID: FV-BP200__200F

Precio: €337.00

Resumen: Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Precio: €890.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación (G): M3

Existencias disponibles - Envío en 1-2 días

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Precio: €900.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación: M4 / M8

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Precio: €884.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: €31.00

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Vee Locator

ID: FV-FEMALE

Precio: €25.00

Resumen: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: €42.00

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Precio: €236.00

Resumen: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilidad placas: FV-200-200C, FV-200/200F, FV-200/200P

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: €9.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Cone Adjustable (M4)

ID: FV-CONEADJ

Precio: €14.00

Resumen: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Precio: €31.00

Resumen: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Precio: €695.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.