text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
Azonosító: FV-FEMALE
Ár:  €32.00
Gyors áttekintés:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-GUIDE480
Ár:  €254.00
Gyors áttekintés:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-CONEADJ
Ár:  €21.00
Gyors áttekintés:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-LATSML
Ár:  €38.00
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-BP200__200P
Ár:  €540.00
Gyors áttekintés:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-MALE
Ár:  €23.00
Gyors áttekintés:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Rosca:  M4
Raktáron - Kiszállítás 1-2 napon belül
Azonosító: FV-FULLKIT
Ár:  €2,300.00
Gyors áttekintés:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
Stock goods
SKU: FV-SLIDE
Price:  €407.00
Quick overview:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
Stock goods
SKU: FV-BP200__200C
Price:  €550.00
Quick overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
Stock goods
SKU: FV-ANGSLIDER
Price:  €21.00
Quick overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Stock goods
SKU: FV-CNRBRKT
Price:  216,00 zł
Quick overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Stock goods
SKU: FV-POST
Price:  78,00 zł
Quick overview:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
Stock goods
SKU: FC-70SS3-NF
Price:  900,00 €
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Stock goods
SKU: FX-BP300__400
Price:  900,00 €
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
Stock goods
SKU: FX-CTSML
Price:  32,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Stock goods
SKU: FV-VEETWIN
Price:  46,00 €
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Stock goods
SKU: FV-SO8__20
Price:  10,00 €
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  8mm
Stock goods
SKU: FX-SO16__20
Price:  17,00 €
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  16mm
Stock goods
SKU: FX-PR30HINGE
Price:  82,00 €
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Stock goods
SKU: FX-CTMED
Price:  32,00 €
Quick overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Stock goods