text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo

Catálogo

Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  CHF420.00
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
En stock
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  CHF570.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-AB190/200F
  • Rosca:  M4
  • Previous Part Number:  FV-AB180/200F
En stock
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  CHF22.00
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
En stock
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  CHF19.00
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10
  • Diámetro:  8
En stock
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  CHF52.00
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En stock
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  CHF32.00
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En stock
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  CHF19.00
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
En stock
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  CHF475.00
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
En stock
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  CHF600.00
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
En stock
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  CHF142.00
Resumen:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Rosca:  M8
En stock
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  CHF18.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
En stock
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  CHF18.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10
  • Diámetro:  8
En stock
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  CHF46.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Rosca:  M4
En stock
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  CHF15.00
Resumen:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
En stock
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  CHF930.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación (G):  M3
En stock
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  CHF940.00
Resumen:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
En stock
M4-Stylus Extension (SS-7-L10)
M4-Stylus Extension (SS-7-L10)
ID: H00027383
Precio:  CHF13.00
Resumen:  Stylus extension with M4 thread, stainless steel stem Ø7 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-TV10-ST-M4-D7
  • Rosca:  M4
  • Previous Part Number:  91.00-TV10-ST-M4-D7
  • Diámetro del vástago (D):  7
  • Material del vástago:  Acero inoxidable
  • Longitud (L):  10
En stock
M3-Cylindrical Stylus (AA-30-SS-5.5-L36.5)
M3-Cylindrical Stylus (AA-30-SS-5.5-L36.5)
ID: H00027377
Precio:  CHF195.00
Resumen:  Cylindrical stylus with M3 thread, made of anodised aluminium Ø30 mm, stainless steel stem with predefined break point, length 36.5 mm. For use on machine tools. Previous part number: 21.00-T36.5/30-M3
  • Previous Part Number:  21.00-T36.5/30-M3
  • Rosca:  M3
  • Material de la punta:  Aluminio anodizado
  • Diámetro de punta (D):  30
  • Longitud (L):  36.5
En stock
M4-Stylus Extension (SS-7-L20)
M4-Stylus Extension (SS-7-L20)
ID: H00027370
Precio:  CHF13.00
Resumen:  Stylus extension with M4 thread, stainless steel stem Ø7 mm, length 20 mm. For use on machine tools. Previous part number: 91.00-TV20-ST-M4-D7
  • Rosca:  M4
  • Previous Part Number:  91.00-TV20-ST-M4-D7
  • Diámetro del vástago (D):  7
  • Material del vástago:  Acero inoxidable
  • Longitud (L):  20
En stock
M4-Tool Setter Stylus (TC-37-CE-6-L16)
M4-Tool Setter Stylus (TC-37-CE-6-L16)
ID: H00027373
Precio:  CHF303.00
Resumen:  Disc stylus made of tungsten carbide Ø37 mm with M4 thread and break shaft made of ceramic. For use on tool setters. Previous part number: 35.10-D37/16-M4
  • Previous Part Number:  35.10-D37/16-M4
  • Rosca:  M4
  • Material de la punta:  Carburo de tungsteno
  • Diámetro de punta (D):  37
  • Longitud (L):  16
En stock