text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
Calibration Pin
ID: 35.20-CP
Prijs:  zł130.50
Beknopt overzicht:  Calibration pin (10 mm). For use on machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Stainless steel)
ID: 21.00-VE30
Prijs:  zł702.00
Beknopt overzicht:  Extension (30 mm) made of stainless steel for measuring units on machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Storage Box
ID: 3611
Prijs:  zł211.50
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 5 mm)
ID: 5209
Prijs:  zł432.00
Beknopt overzicht:  Calibration pin with a diameter of 5 mm. For calibration of laser tool setters on machine tools..
  • Diámetro:  5mm
  • Longitud:  120mm
  • Aplicación:  Laser Tool Setter Calibration
  • Material:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 10 mm)
ID: 4286
Prijs:  zł463.50
Beknopt overzicht:  Calibration pin (D = 10 mm). For use on machine tools.
  • Diámetro:  10mm
  • Longitud:  120mm
  • Aplicación:  Laser Tool Setter Calibration
  • Material:  Steel, hardened
Op voorraad – Verzendtijd 1-2 dagen
Battery (3.6 V / 1/2AA)
ID: 4316
Prijs:  zł24.75
Beknopt overzicht:  Battery (3.6 V / 1/2AA) for use in measurement devices for machine tools.
  • Tamaño:  1/2 AA
  • Voltaje:  3,6V
  • Capacity:  1.200mAh
  • Compatibilidad:  IRP40.01, IRP40.02, IRP40.40-LF, IRP40.42, IRT35.70, IRT35.71, RWP38.41, RWT35.40, RWT35.50
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 14 mm
ID: 4274
Prijs:  zł29.25
Beknopt overzicht:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Material:  Tempered Steel
  • Internal Thread:  M12
  • Medida nominal de ranura en T:  14mm
Op voorraad – Verzendtijd 1-2 dagen
M8-Extension for Calibration Set (D = 25 mm)
ID: 5248
Prijs:  zł211.50
Beknopt overzicht:  M8-Extension for calibration sets 12 / 14 / 18 / 22. Diameter 25 mm, Length 75 mm. For use on machine tools.
  • Outside Thread:  M8
  • Inside Thread:  M8
  • Diámetro:  25mm
  • Longitud:  75mm
  • Material:  Acero inoxidable
Op voorraad – Verzendtijd 1-2 dagen
Battery (3 V / CR2032)
ID: 5309
Prijs:  zł15.75
Beknopt overzicht:  Battery (3 V / CR2032) for use in measurement devices for machine tools.
  • Tamaño:  9 V Block
  • Voltaje:  9V
  • Capacity:  1.200mAh
  • Compatibilidad:  IRP40.50
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 22 mm
ID: 4411
Prijs:  zł117.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 12 mm
ID: 4418
Prijs:  zł24.75
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 18 mm
ID: 4431
Prijs:  zł63.00
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Storage Box
ID: 4301
Prijs:  zł148.50
Beknopt overzicht:  Storage box for storage and transport of Hexagon measuring systems for machine tools.
Op voorraad – Verzendtijd 1-2 dagen
T-Nut 16 mm
ID: 5453
Prijs:  zł56.25
Beknopt overzicht:  T-Nut for the mounting of measuring systems and accessories in machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Calibration Pin (D = 4 mm / D = 10 mm)
ID: 4420
Prijs:  zł1,039.50
Beknopt overzicht:  #N/A
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (Carbon)
ID: 41.00-VE300
Prijs:  zł2,236.50
Beknopt overzicht:  Extension (300 mm) made of carbon for measuring units on machine tools.
Op voorraad – Verzendtijd 1-2 dagen
Measuring Unit Extension (L = 340 mm / 13.39")
ID: 41.00-VE340
Prijs:  zł237,481.00
Beknopt overzicht: 

Short description Text

Op voorraad – Verzendtijd 1-2 dagen
Calibration Ring (D = 40 mm / 1.57")
ID: 91.00-CR
Prijs:  zł562.50
Beknopt overzicht:  Calibration ring (Inner Diameter = 40 mm). For use on machine tools.
  • Inner Diameter:  40mm
Op voorraad – Verzendtijd 1-2 dagen
Connecting Cable (L = 10 m / 32.8')
ID: 91.30-ST10
Prijs:  zł32,325.00
Beknopt overzicht: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m (32.8')

Op voorraad – Verzendtijd 1-2 dagen
Connecting Cable (L = 15 m / 49.2')
ID: 91.40-ST15-X112-DUO
Prijs:  zł83,183.00
Beknopt overzicht: 

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain iTNC 530 HSCI and TNC 620, 640 controls, control input X112. Shielded cable with M12/F08 and DSUB HD/M15 plug. Length: 15 m (49.2')

Op voorraad – Verzendtijd 1-2 dagen