Máquina Herramienta

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø2.8 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-T13/6-ST-M3

Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø4 mm, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3

Straight stylus with M4 thread with long shaft, ruby ball Ø6 mm, ceramic stem Ø4.5 mm, length 100 mm. For use with M4-Stylus Center 5-Way (H00031274) on machine tools. Previous part number: 91.00-T103/6-KE-M4-L

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 10 m / 32.8'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 5 m / 16.4'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 15 m / 49.2'

Sensor cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F12 plug and open wires. Length: 30 m / 98.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'

Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'

Pull stud with integrated mechanism for activating Hexagon touch probes equipped with SK50 taper shank.

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Adapter from D20 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D20 connection.

Hollow taper shank HSK32 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. With built-in pull stud AZ-01 for probe activation via preloaded pull stud.

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.