text.skipToContent text.skipToNavigation
Come parte dei nostri nuovi aggiornamenti di sicurezza, ti chiediamo di reimpostare la password
  1. Home
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  €900.00
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
In giacenza - Spedizione in 1-2 giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  €910.00
Breve panoramica:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
In giacenza - Spedizione in 1-2 giorni
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  €49.00
Breve panoramica:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  €10.00
Breve panoramica:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  €82.00
Breve panoramica:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  €37.00
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 50mm
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Prezzo:  €17.00
Breve panoramica:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  30mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prezzo:  €25.00
Breve panoramica:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prezzo:  €45.00
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 200mm
In giacenza - Spedizione in 1-2 giorni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  €254.00
Breve panoramica:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  €10.00
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  20mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  €21.00
Breve panoramica:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
In giacenza - Spedizione in 1-2 giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  32,00 €
Breve panoramica:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In giacenza - Spedizione in 1-2 giorni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prezzo:  750,00 €
Breve panoramica:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
In giacenza - Spedizione in 1-2 giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  32,00 €
Breve panoramica:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In giacenza - Spedizione in 1-2 giorni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prezzo:  38,00 €
Breve panoramica:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prezzo:  52,00 €
Breve panoramica:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  20mm
  • Diámetro:  16mm
In giacenza - Spedizione in 1-2 giorni
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Prezzo:  980,00 €
Breve panoramica:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M8
  • Aplicación:  MMC, Brazos Medición Portátil
In giacenza - Spedizione in 1-2 giorni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prezzo:  42,00 €
Breve panoramica:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 150mm
In giacenza - Spedizione in 1-2 giorni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  10,00 €
Breve panoramica:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longitud:  25mm
  • Diámetro:  8mm
In giacenza - Spedizione in 1-2 giorni