text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue

Catalogue

RA8 Maintenance and Calibration (6-Axis)
RA8 Maintenance and Calibration (6-Axis)
N° : M58-RA8-6AXIS
Prix:  €3,100.00
Vue d'ensemble sommaire: 

Maintenance programs significantly extend the service life of a mobile measuring arm and are a recommended investment. We generally recommend a 12-month maintenance interval.
RA8 Maintenance and Calibration (7-Axis)
RA8 Maintenance and Calibration (7-Axis)
N° : M58-RA8-7AXIS
Prix:  €3,990.00
Vue d'ensemble sommaire: 

Maintenance programs significantly extend the service life of a mobile measuring arm and are a recommended investment. We generally recommend a 12-month maintenance interval.
Vee Locator
Vee Locator
N° : FV-FEMALE
Prix:  €32.00
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
En stock - Livraison sous 1 à 2 jours
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
N° : FV-GUIDE480
Prix:  €254.00
Vue d'ensemble sommaire:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Compatibilidad placas:  FV-200-200C, FV-200/200F, FV-200/200P
En stock - Livraison sous 1 à 2 jours
Cone Adjustable (M4)
Cone Adjustable (M4)
N° : FV-CONEADJ
Prix:  €21.00
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
N° : FV-LATSML
Prix:  €38.00
Vue d'ensemble sommaire:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longitud:  10mm
  • Diámetro:  8mm
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
N° : FV-BP200__200P
Prix:  €540.00
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Centering Pin
Centering Pin
N° : FV-MALE
Prix:  €23.00
Vue d'ensemble sommaire:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
N° : FV-FULLKIT
Prix:  €2,300.00
Vue d'ensemble sommaire:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
N° : FV-BP200__200C
Prix:  €550.00
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Angle Block Slider (M4)
Angle Block Slider (M4)
N° : FV-ANGSLIDER
Prix:  €21.00
Vue d'ensemble sommaire:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Corner Bracket
Corner Bracket
N° : FV-CNRBRKT
Prix:  50,00 €
Vue d'ensemble sommaire:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En stock - Livraison sous 1 à 2 jours
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
N° : FV-BP200__200F
Prix:  2 506,00 zł
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
Resting Cone (M4)
Resting Cone (M4)
N° : FV-CONE
Prix:  65,00 zł
Vue d'ensemble sommaire:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  3 888,00 zł
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  3 931,00 zł
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
En stock - Livraison sous 1 à 2 jours
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
Taper Shank DIN ISO 7388 SK40 / ANSI B5.50 CAT40
N° : D28-SK__CAT40-A__B
Prix:  968,00 zł
Vue d'ensemble sommaire: 

Taper shank SK40/CAT40 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK63 Form E
Hollow Taper Shank HSK63 Form E
N° : D28-HSK63E-B
Prix:  1 642,00 zł
Vue d'ensemble sommaire: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK63 Form A
Hollow Taper Shank HSK63 Form A
N° : D28-HSK63A-M
Prix:  1 594,00 zł
Vue d'ensemble sommaire: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
En stock - Livraison sous 1 à 2 jours
Hollow Taper Shank HSK100 Form A
Hollow Taper Shank HSK100 Form A
N° : D28-HSK100A-M
Prix:  1 836,00 zł
Vue d'ensemble sommaire: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.
En stock - Livraison sous 1 à 2 jours