text.skipToContent text.skipToNavigation

Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña

CMM

Se han encontrado 154 producto(s)

3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)

ID: FC-70SS3

Precio: €900.00

Resumen: Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Diámetro exterior mandril (D1): 70mm
Area de fijación exterior (A): 1 - 71mm
Area de fijación interior (I): 18 - 66mm
Material: Acero inoxidable
Fijación: M4 / M8

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Precio: €884.00

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Precio: €31.00

Resumen: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Vee Locator

ID: FV-FEMALE

Precio: €25.00

Resumen: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Existencias disponibles - Envío en 1-2 días

Vee Block Twin

ID: FV-VEETWIN

Precio: €42.00

Resumen: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Existencias disponibles - Envío en 1-2 días

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Precio: €236.00

Resumen: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilidad placas: FV-200-200C, FV-200/200F, FV-200/200P

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Precio: €9.00

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 20mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Cone Adjustable (M4)

ID: FV-CONEADJ

Precio: €14.00

Resumen: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Rosca: M4

Existencias disponibles - Envío en 1-2 días

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Precio: 31,00 €

Resumen: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Precio: 695,00 €

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca: M8

Existencias disponibles - Envío en 1-2 días

Spring Nut (M8)

ID: FX-M8SPRGNUT

Precio: 31,00 €

Resumen: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Existencias disponibles - Envío en 1-2 días

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Precio: 32,00 €

Resumen: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 10mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Precio: 42,00 €

Resumen: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Longitud: 20mm
Diámetro: 16mm

Existencias disponibles - Envío en 1-2 días

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Precio: 968,00 €

Resumen: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Rosca: M8
Aplicación: MMC, Brazos Medición Portátil

Existencias disponibles - Envío en 1-2 días

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Precio: 9,00 €

Resumen: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud: 25mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Standoff Support (M4)

ID: FV-SOSUP

Precio: 14,00 €

Resumen: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Longitud: 6mm
Diámetro: 8mm

Existencias disponibles - Envío en 1-2 días

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Precio: 1.011,00 €

Resumen: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.