text.skipToContent text.skipToNavigation
Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen
ID: FV-SLIDE
Prijs:  CHF297.85
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200C
Prijs:  CHF302.45
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-ANGSLIDER
Prijs:  CHF21.85
Beknopt overzicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CNRBRKT
Prijs:  CHF56.35
Beknopt overzicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-POST
Prijs:  CHF17.25
Beknopt overzicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-BP200__200F
Prijs:  CHF387.55
Beknopt overzicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SLIDER
Prijs:  CHF17.25
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-SO__MAG
Prijs:  CHF16.10
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longitud:  10mm
  • Diámetro:  8mm
Op voorraad – Verzendtijd 1-2 dagen
ID: FV-CONE
Prijs:  CHF14.95
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
Op voorraad – Verzendtijd 1-2 dagen
ID: FC-70SS3-NF
Prijs:  CHF1,023.50
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
  • Fijación (G):  M3
Op voorraad – Verzendtijd 1-2 dagen
ID: ART109451
Prijs:  CHF1,230.50
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=10 mm. For magnetic adhering to the workpiece.
  • Codificación:  14 bits
  • Tipo de reflexión:  Punto blanco
  • Diámetro (D1):  10mm
  • Adhesión:  Magnético (M)
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK63E-B
Prijs:  CHF380.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form E for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: ART107146
Prijs:  CHF713.00
Beknopt overzicht:  Set consisting of 5000 white uncoded measurement targets with ring diameter of D1=20 mm and D2=27 mm. Easily removable after adhering to the workpiece.
  • Codificación:  No codificado
  • Tipo de reflexión:  Punto blanco
  • Diámetro (D1):  20mm
  • Diámetro (D2):  27mm
  • Adhesión:  Removible (R)
Op voorraad – Verzendtijd 1-2 dagen
ID: ART111281
Prijs:  CHF322.00
Beknopt overzicht:  Set consisting of white coded measurement targets with numbers 151-500. Ring diameter of center D1=5 mm. For permanently adhering to the workpiece.
  • Codificación:  14 bits
  • Tipo de reflexión:  Punto blanco
  • Diámetro (D1):  5mm
  • Adhesión:  Permanente (P)
Op voorraad – Verzendtijd 1-2 dagen
ID: D28-SK30-B
Prijs:  CHF291.00
Beknopt overzicht: 

Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection and bidirectional probe activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK63F-B
Prijs:  €369.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form F for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK50E-M
Prijs:  €481.00
Beknopt overzicht: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with D28 connection and mechanical activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK100A-W
Prijs:  €380.00
Beknopt overzicht: 

Hollow taper shank HSK100 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK80A-B
Prijs:  €540.00
Beknopt overzicht: 

Hollow taper shank HSK80 Form A for use with Hexagon touch probes with D28 connection and bidirectional activation in the machine tool.

Op voorraad – Verzendtijd 1-2 dagen
ID: D28-HSK63A-W
Prijs:  €335.00
Beknopt overzicht: 

Hollow taper shank HSK63 Form A for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.

Op voorraad – Verzendtijd 1-2 dagen