text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le pedirá que restablezca su contraseña
  1. Página de inicio
  2. Catálogo
  3. MMC
  4. Medios de sujección

Medios de sujección

Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  14,00 €
Resumen:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  695,00 €
Resumen:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  32,00 €
Resumen:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Precio:  9,00 €
Resumen:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  25mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  14,00 €
Resumen:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  6mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Precio:  263,00 €
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Centering Pin
Centering Pin
ID: FV-MALE
Precio:  20,00 €
Resumen:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  259,00 €
Resumen:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  263,00 €
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  19,00 €
Resumen:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  13,00 €
Resumen:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  49,00 €
Resumen:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
Existencias disponibles - Envío en 1-2 días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  29,00 €
Resumen:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Existencias disponibles - Envío en 1-2 días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  15,00 €
Resumen:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  453,00 €
Resumen:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
Existencias disponibles - Envío en 1-2 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  337,00 €
Resumen:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  €95.00
Resumen:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Filetage:  M8
Existencias disponibles - Envío en 1-2 días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  €17.00
Resumen:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  €16.00
Resumen:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  10mm
  • Diamètre:  8mm
Existencias disponibles - Envío en 1-2 días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  €50.00
Resumen:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Filetage:  M4
Existencias disponibles - Envío en 1-2 días