text.skipToContent text.skipToNavigation

Als onderdeel van onze nieuwe beveiligingsupgrades wordt u verzocht uw wachtwoord opnieuw in te stellen

CMM

155 product(en) gevonden

Ceramic Calibration Sphere Kit (D = 15 mm, H = 200 mm)

ID: G39031401

Prijs: €776.00

Beknopt overzicht:

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET

ID: GB-0122-1000

Prijs: €6,500.00

Probe Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Prijs: €550.00

Beknopt overzicht: Adapter to allow X1 styli builds

Probe Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Op voorraad – Verzendtijd 1-2 dagen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Prijs: €471.00

Probe Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: €46.00

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: €10.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: €750.00

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prijs: €10.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 25mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff Support (M4)

ID: FV-SOSUP

Prijs: €17.00

Beknopt overzicht: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Length: 6mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Fixture Baseplate 400x400x12mm (M8)

ID: FX-BP400__400

Prijs: €1,030.00

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix Vision - Starter Kit

ID: FV-STARTERKIT

Prijs: €1,140.00

Beknopt overzicht: The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Threa: M4
Application: Multisensor CMM

Op voorraad – Verzendtijd 1-2 dagen

Standoff (D = 8 mm / L = 15 mm)

ID: FV-SO8__15

Prijs: €10.00

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 15mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Standoff Pin (D = 8 mm / L = 10 mm)

ID: FV-SO__PIN

Prijs: €18.00

Beknopt overzicht: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 10mm
Diameter: 8mm

Op voorraad – Verzendtijd 1-2 dagen

Vee Block Single

ID: FV-VEE

Prijs: 32,00 CHF

Beknopt overzicht: The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.

Op voorraad – Verzendtijd 1-2 dagen

Swift-Fix - Basic Kit

ID: FX-BASIC__KIT

Prijs: 475,00 CHF

Beknopt overzicht: The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.

Threa: M8
Application: CMM, Portable Measuring Arm

Op voorraad – Verzendtijd 1-2 dagen

Articulated Fixture Arm (M8)

ID: FX-ARM

Prijs: 142,00 CHF

Beknopt overzicht: The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.

Threa: M8

Op voorraad – Verzendtijd 1-2 dagen

Slider Block (M4)

ID: FV-SLIDER

Prijs: €17.00

Beknopt overzicht: A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.

Threa: M4

Op voorraad – Verzendtijd 1-2 dagen

Standoff Magnet (D = 8 mm / L = 10 mm)

ID: FV-SO__MAG

Prijs: €17.00

Beknopt overzicht: The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.