text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji zabezpieczeń prosimy o zresetowanie hasła
  1. Strona główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Cena:  zł2,801,500.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  zł265,496.00
Szybki podgląd:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
W magazynie — wysyłka 1–2 dni
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  zł228,861.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
W magazynie — wysyłka 1–2 dni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  zł9,482.00
Szybki podgląd:  The angle block slider enables users to position elements horizontally on the base plate.
  • Threa:  M4
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  zł434,448.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  zł15,085.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  zł12,499.00
Szybki podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
W magazynie — wysyłka 1–2 dni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Cena:  zł20,688.00
Szybki podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
W magazynie — wysyłka 1–2 dni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  zł115,939.00
Szybki podgląd:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility :  FV-200-200C, FV-200/200F, FV-200/200P
W magazynie — wysyłka 1–2 dni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  zł4,310.00
Szybki podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
W magazynie — wysyłka 1–2 dni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Cena:  zł6,896.00
Szybki podgląd:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
W magazynie — wysyłka 1–2 dni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  zł15,085.00
Szybki podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
W magazynie — wysyłka 1–2 dni
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  zł341,352.00
Szybki podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Cena:  zł15,085.00
Szybki podgląd:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Cena:  26,00 $
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10mm
  • Diameter:  8mm
W magazynie — wysyłka 1–2 dni
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Cena:  35,00 $
Szybki podgląd:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20mm
  • Diameter:  16mm
W magazynie — wysyłka 1–2 dni
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Cena:  834,00 £
Szybki podgląd:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
W magazynie — wysyłka 1–2 dni
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Cena:  6 060,83 £

944,00 £
Szybki podgląd:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
W magazynie — wysyłka 1–2 dni
Support Stop
Support Stop
ID: FX-SUP__STOP
Cena:  459,41 £

72,00 £
Szybki podgląd:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Threa:  M8
W magazynie — wysyłka 1–2 dni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  226,94 £

35,00 £
Szybki podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150mm
W magazynie — wysyłka 1–2 dni