text.skipToContent text.skipToNavigation
V rámci našich nových inovací zabezpečení budete požádáni o obnovení hesla
  1. Domů
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

Angle Block Slider (M4)
Angle Block Slider (M4)
Kód produktu: FV-ANGSLIDER
Cena:  €21.00
Rychlý přehled:  The angle block slider enables users to position elements horizontally on the base plate.
  • Threa:  M4
Skladem – doba odeslání 1-2 dny
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
Kód produktu: FC-70SS3-NF
Cena:  €900.00
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Skladem – doba odeslání 1-2 dny
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
Kód produktu: FC-70SS3
Cena:  €910.00
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing:  M4 / M8
Skladem – doba odeslání 1-2 dny
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
Kód produktu: FX-BP300__400
Cena:  €900.00
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Skladem – doba odeslání 1-2 dny
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
Kód produktu: FX-CTSML
Cena:  €32.00
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
Skladem – doba odeslání 1-2 dny
Vee Locator
Vee Locator
Kód produktu: FV-FEMALE
Cena:  €32.00
Rychlý přehled:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Skladem – doba odeslání 1-2 dny
Vee Block Twin
Vee Block Twin
Kód produktu: FV-VEETWIN
Cena:  €46.00
Rychlý přehled:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Skladem – doba odeslání 1-2 dny
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
Kód produktu: FV-GUIDE480
Cena:  €254.00
Rychlý přehled:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Plate Compatibility :  FV-200-200C, FV-200/200F, FV-200/200P
Skladem – doba odeslání 1-2 dny
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
Kód produktu: FV-SO8__20
Cena:  €10.00
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  8
Skladem – doba odeslání 1-2 dny
Cone Adjustable (M4)
Cone Adjustable (M4)
Kód produktu: FV-CONEADJ
Cena:  19,00 £
Rychlý přehled:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
Skladem – doba odeslání 1-2 dny
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
Kód produktu: FX-CTMED
Cena:  29,00 £
Rychlý přehled:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
Skladem – doba odeslání 1-2 dny
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
Kód produktu: FX-BP300__300
Cena:  682,00 £
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Skladem – doba odeslání 1-2 dny
Spring Nut (M8)
Spring Nut (M8)
Kód produktu: FX-M8SPRGNUT
Cena:  29,00 £
Rychlý přehled:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Skladem – doba odeslání 1-2 dny
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Kód produktu: FV-LATSML
Cena:  35,00 £
Rychlý přehled:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10
  • Diameter:  8
Skladem – doba odeslání 1-2 dny
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Kód produktu: FX-LATMED
Cena:  47,00 £
Rychlý přehled:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20
  • Diameter:  16
Skladem – doba odeslání 1-2 dny
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
Kód produktu: FX-BRONZE__KIT
Cena:  891,00 £
Rychlý přehled:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
Skladem – doba odeslání 1-2 dny
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
Kód produktu: FV-SO8__25
Cena:  9,00 £
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25
  • Diameter:  8
Skladem – doba odeslání 1-2 dny
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
Kód produktu: FX-BP400__600
Cena:  1 591,00 £
Rychlý přehled:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
Skladem – doba odeslání 1-2 dny
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
Kód produktu: FV-SO8__15
Cena:  9,00 £
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  15
  • Diameter:  8
Skladem – doba odeslání 1-2 dny
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
Kód produktu: FX-CAPM8__16
Cena:  16,00 £
Rychlý přehled:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Threa:  M8
Skladem – doba odeslání 1-2 dny