Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
SWIFT-SET
ID: GB-0122-1000
Price:  $7,995.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  $498.00
Quick Overview:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  $427.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Price:  $212.00
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  $14.00
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Price:  $9.00
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10mm
  • Diameter:  8mm
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  $794.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  $28.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Vee Block Twin
ID: FV-VEETWIN
Price:  $32.00
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
ID: FX-SPRING
Price:  $43.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  $12.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  $47.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  $28.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  $615.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  $20.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  $26.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In Stock - Despatched 1-2 Days
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Price:  $52.00
Quick Overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
In Stock - Despatched 1-2 Days
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Price:  $1,100.00
Quick Overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Kinematic Support Kit
ID: FX-KINKIT
Price:  $192.00
Quick Overview:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
In Stock - Despatched 1-2 Days
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Price:  $16.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  20mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days