Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Price:  CHF7,475.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  CHF540.00
Quick Overview:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  CHF466.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  CHF48.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Price:  CHF9.00
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  CHF16.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  CHF47.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  CHF23.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Price:  CHF54.00
Quick Overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Size:  120 x 45 x 12 mmmm
In Stock - Despatched 1-2 Days
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Price:  CHF1,095.00
Quick Overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Price:  CHF9.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20mm
  • Diameter:  8mm
In Stock - Despatched 1-2 Days
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Price:  CHF14.00
Quick Overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Price:  CHF31.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Price:  CHF695.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Price:  CHF31.00
Quick Overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Price:  CHF32.00
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10mm
  • Diameter:  8mm
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Price:  CHF42.00
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  20mm
  • Diameter:  16mm
In Stock - Despatched 1-2 Days
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Price:  CHF968.00
Quick Overview:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Price:  CHF41.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Size:  30 x 30 x 150mm
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Price:  CHF9.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  25mm
  • Diameter:  8mm
In Stock - Despatched 1-2 Days