Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET
SWIFT-SET
ID: GB-0122-1000
Price:  €6,500.00
  • Probe Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adaptor), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  €550.00
Quick Overview:  Adapter to allow X1 styli builds
  • Probe Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
In Stock - Despatched 1-2 Days
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  €471.00
  • Probe Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
In Stock - Despatched 1-2 Days
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  €21.00
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Threa:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Price:  €900.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
In Stock - Despatched 1-2 Days
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
3-JAW CHUCK WITH FLANGE(STAINLESS STEEL / D=70 MM)
ID: FC-70SS3
Price:  €910.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Price:  €1,750.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Centering Pin
Centering Pin
ID: FV-MALE
Price:  €23.00
Quick Overview:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Price:  €1,140.00
Quick Overview:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Threa:  M4
  • Application:  Multisensor CMM
In Stock - Despatched 1-2 Days
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Price:  €10.00
Quick Overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  15
  • Diameter:  8
In Stock - Despatched 1-2 Days
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Price:  €17.00
Quick Overview:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Price:  €17.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10
  • Diameter:  8
In Stock - Despatched 1-2 Days
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Price:  €45.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Kinematic Support Kit Plus
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Price:  €266.00
Quick Overview:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
In Stock - Despatched 1-2 Days
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Price:  €15.00
Quick Overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Threa:  M4
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Price:  €49.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
In Stock - Despatched 1-2 Days
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Price:  €10.00
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Threa:  M8
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Price:  €17.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  20
  • Diameter:  16
In Stock - Despatched 1-2 Days
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Price:  €82.00
Quick Overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
In Stock - Despatched 1-2 Days
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Price:  €25.00
Quick Overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  100
  • Diameter:  16
In Stock - Despatched 1-2 Days